King Rod Bearings - EVO 8/9 :: EVO 8/9 Internal Engine Parts :: EVO 8/9 Engine Parts :: Engine :: LancerShop.com</title>
Search
 Home   Help   Testimonials   New Arrivals   View Cart   Install Tips 
Categories
Air Intake
Accessories
Blow Off Valve
Boost Controllers
Brakes
Clutch - Trans
Electronics
Engine
Exhaust
Exterior
Fuel
Gauges
Intercooler
Interior
Maintenance
Suspension
Turbo
Wheels

Deals of the Day

Bestsellers
1. ARP Head Studs Full Set - EVO 8/9
2. Gates Performance Strong Timing Belt + Balance Belt - EVO 8/9
3. Supertech Black Nitrided Standard Size Exhaust Valve - EVO 8/9
4. Supertech Black Nitrided Standard Size Intake Valve - EVO 8/9
5. Mitsubishi OEM Metal Head Gasket - EVO 8
6. Supertech Standard Exhaust Valve Seal - EVO 8/9
7. Supertech Standard Intake Valve Seal - EVO 8/9
8. AMS Performance Timing Belt Tensioner Tool - EVO 8/9
9. Gates Water Pump - EVO 8
10. Supertech Standard Size Intake Valve Guide - EVO 8/9


Testimonials
I was served by Janelle tonight. I was hoping to purchase an Evolution 7 Rear Trunk Badge and had many questions and confusions.

Luckily, Janelle was able to help me entirely! I ended up purchasing the exact item i had interested in. I am really looking forward to the item and hope it all goes smoothly! Hoping to shop with LancerShop very soon for another smooth transaction!

Janelle definitely deserves to be recognized for her great effort & kindness! Thank you Janelle for being a great service representative!

Have a great day! =]
Richard Petreski

View All Testimonials

Write Your Own Testimonial


Recently Viewed
No recent products.
Gift Cards
Gift certificates


TRENDING: Rexpeed | AMS | Ultimate Racing | Engine Parts | Buschur Racing


LancerShop.com :: Engine :: EVO 8/9 Engine Parts :: EVO 8/9 Internal Engine Parts :: King Rod Bearings - EVO 8/9

King Rod Bearings - EVO 8/9

King Rod Bearings - EVO 8/9

King Rod Bearings - EVO 8/9 

Product Description

The HP series was developed mainly for drag race applications needing a material that is harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short duration and still offer higher embedabilty and compatibility. In response, KING developed the HP Series featuring the Alecular™ metal structure.

The HP series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip and some levels of circle track racing.

All King Bearings are specifically engineered to withstand the highest loads and RPMs generated by today’s top competition engines. All King Performance Engine Bearings feature:

* *“Bull’s Eye Tolerance”*. King engine bearings have the closest wall tolerances in the industry, with all shells matched to 0.0001".
* *Increased Height.* Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM.
* *Improved Oiling.* Mains feature enlarged, chamfered oil holes.
* *Medium Eccentricity.* This enables optimum load distribution and improved oiling.
* *Dowel Holes.* Most rod bearings are available with or without dowel holes.
* *Narrowed Design.* Mains and rods are narrowed for large-radius crankshafts.

We offer the industry’s widest selection of sizes, including special clearance options. With more choices than ever, you’ll find the right King High Performance Engine Bearings for your most demanding applications.

*HP series is particularly suitable for the following cases:*
* When a tri-metal bearing’s Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft
* When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement
* When Contaminants enter the oil stream, scratching and damaging the crankshaft journals
*King HP Bearings Features*

*Applications*
* High-load, short-duration racing such as drag racing, tractor pulls, monster trucks, etc.
* Medium-load, long-duration racing such as circle track engines using nodular cast iron crankshafts

*Construction*
Bi-metal aluminum silicon alloy featuring fine micro-bore finish

*Features*
* 0.015" thick top layer for superior macro particle embedability and conformability
* 40 Vickers hardness to resist overlay migration and extrusion
* 450°F heat threshold for superior protection against friction and overheating
* Mains are 3/4 grooved for improved oiling to the rod journals

Part# CR4120SI

Details

Price: $31.95

Purchase Product

 
Qty        

 


Related Options

 

 
Online Users
» 16016 Shoppers

Your cart
Welcome to LancerShop! In order to shop with us, you must create an account.

Your Cart is Empty!
» View cart
» Checkout
» Wish list
» Where's my stuff?

Your Account
Username

Password


Remember Me
Recover password

If Javascript is disabled in your browser click here


Help

» Sales Inquiries
» Contact us
» Privacy statement
» Recover password


 
  1-888-554-6447 -- info@LancerShop.com  -- URL: https://www.LancerShop.com
© 2002-2019 LancerShop.com. All Rights Reserved.
 
Dress Up Bolts