|
|
LancerShop.com :: Engine :: EVO 8/9 Engine Parts :: EVO 8/9 Internal Engine Parts
Lancer Evolution head gaskets, studs, rods, pistons, etc.
 |
 |
| EVO 8/9 Internal Engine Parts | |
|
 |
|
 |
|
 |
| Wait! There's More: |
1 |
2 |
3 |
4 |
 |
|
More info
|
ACL High Performance Rod Bearing Set - EVO 8/9
ACL rod bearings have a special coating process that will help prevent premature engine failure.
The ACL rod bearings have a higher degree of crush, and no flash plating to ensure efficient heat transfer away from the bearings.
Fits:<...
Sale price: $42.95
|
|
More info
|
ACL Race Rod Bearing Set - EVO 8/9
ACL rod bearings have a special coating process that will help prevent premature engine failure.
The ACL rod bearings have a higher degree of crush, and no flash plating to ensure efficient heat transfer away from the bearings.
TECH T...
Sale price: $42.95
|
|
More info
|
AMS 4G63/4G64 Torque/Honing Plate - EVO 8/9
he AMS 4G63
Torque/Honing Plate is an essential tool when machining your engine
block. The controlled stresses of the cylinder head bolted to the block
have become an important factor in the block's integrity. To ensure
integrity, we mu...
Sale price: $367.95
|
|
More info
|
AMS Performance Cam Gear Alignment Tool - EVO 8/9
The AMS 4g63 Cam Gear alignment tool was designed to lock your cam gears in place while performing a timing belt replacement.
You’ll no longer need to use zip ties, c-clamps or vice grips trying to keep everything in line.
AMS 4...
Sale price: $59.95
|
|
More info
|
AMS Performance Timing Belt Tensioner Tool - EVO 8/9
AMS performance timing belt tensioner tools are 4140 cr-mo pre-hard material. AMS heat treated the tips so they don't wear out after repeated use.
A little anti-seize on the threads will prevent thread galling.
AMS performance timing...
Sale price: $67.95
|
|
More info
|
AMS Performance Wet Sump Oil Pan - EVO 8/9
The AMS Wet Sump Oil Pan is designed to keep oil where it needs to be even in the most severe racing scenarios.
The stock oil pan for the EVO did not take into account the effects that sustained high speed turns or acceleration can have on the oil.
During these sit...
Sale price: $926.95
|
|
More info
|
AMS Spec 2.0 Pistons - EVO 8/9
AMS Spec EVO IV/V/VI/VII/VIII/IX Pistons are ideal for both street and serious competition. These pistons are loaded with extra features such as lightweight design, 9130 hard-chromed wrist pins that are taper bored. These pistons were specially designed by AMS to be the best pis...
Sale price: $713.95
|
|
More info
|
ARP 4G63 M11 Custom Aged 625+ Head Stud Kit - Evo 8/9
For openers, ARP uses a premium grade 8740 alloy that is rated far superior to “aircraft” quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 psi. This procedure ensures complete heat penetration and the results are far superior to those lesser quality s...
Sale price: $372.98
|
|
More info
|
ARP Cam Sprocket Bolt Kit - EVO 8/9
Install an ARP cam bolt kit and end your camshaft timing worries! ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added fe...
Sale price: $44.95
|
|
More info
|
ARP Conrod Bolts - EVO 8/9
It is a good idea when installing the ARP head studs to install these ARP
conrod bolts at the same time.
Fits Mitsubishi Lancer Evolution 8/9
Part # 107-6002
Sale price: $49.95
|
|
More info
|
ARP Head Studs Full Set - EVO 8/9
Building an Evo 4G63 to make more power? Already making more power and your
coolant overflow tank is filling up for no good reason?
The factory head bolts
can begin to stretch with higher cylinder pressures and cause a enough space
between the block and head for combustion to leak ...
Regular price:
$190.45
Sale price: $158.95 save 17%
|
|
More info
|
ARP L19 Head Stud Kit - EVO 8/9
These studs are made from vacuum melted alloyed steel with sufficient chromium and carbon to achieve high hardness (but below the level of a stainless steel)and superior strength. ARP L19 head studs are capable of delivering a clamp loads as high as 230,000-260,000 psi.
Specificati...
Sale price: $245.52
|
|
More info
|
ARP L19 Racing Headstud Kit - EVO 8/9
ARP L19 headstud kit is for drag cars running 35+ PSi from their 4g63 motor.
TECH TIP: L19 head stud kit comes with Studs, bolts, and washers.
Direct bolt in, no modifications needed!
Fits: Mitsubishi Lancer Evolution VIII, IX
Part # ARP-L19-EVO
Sale price: $239.95
|
|
More info
|
ARP Main Studs - EVO 8/9
The APR main studs are an upgrade over the stock factory bolts that may stretch over time.
Includes studs, hardened washers, 12 point nutes, and ARP lube.
TECH TIP: This is a complete set that completely replaces the stock stud...
Sale price: $104.95
|
|
More info
|
ARP Mitsubishi 4G63 Cam Tower Bolt Kit - Evo 8/9
Cam Bolt Kits: Install an ARP cam bolt kit and end your camshaft timing worries! ARP quality delivers increased pre-load clamping force and assures positive timing gear register.
Includes appropriate fasteners for your application. Increased material strength overcomes valve train ha...
Sale price: $75.66
|
|
More info
|
ATP Oil Feed adapter Cyl Head to -4 Male AN - EVO 8
EVO8 Oil Feed adapter, Cyl Head
to -4 Male AN Flair. Adapter goes from proprietary Metric thread on cylinder
head to -4 AN Male. Allows any of our -4 oil feed lines to go directly the
original oil feed source on the cylinde...
Sale price: $12.95
|
|
More info
|
BLE EVO Upgraded Lifter Set
Our BLE Solid Lifters have specific enhancements over the factory and aftermarket hydraulic units. Only the finest 8620 Aerospace and 4130 chromoly steel is used to manufacture this product. Each assembly incorporates a fine-threaded lash adjuster, which features a radiused pivot head...
Sale price: $341.95
|
|
More info
|
BLE Timing Belt Tensioner - Evo 8/9
BLE solid tensioners are manufactured from premium materials and machined to match the factory tensioner's exact mounting position. This innovative solid tensioner allows you to fine-tune the tension on your specific timing belt from stock to kevlar instead of relying on worn out hydraulic units ...
Sale price: $125.95
|
|
More info
|
BLOX Racing Thermal Shield T/B Gasket - EVO 8/9
BLOX Racing offers heavy duty throttle gaskets.
These gaskets are ideal for when servicing throttle bodies during in between-race inspections, rebuilds or for when match-porting to larger throttle bodies and intake manifolds.
Fits: Lancer EVO 8/9
Part#...
Sale price: $40.95
|
|
More info
|
Boomba 75mm Throttle Body - EVO 8/9
Part # 002-00-010
Fits: EVO 8/9
EVO VIII-IX 75 MM throttle body is designed in such way that it will use stock EVO VIII-IX idle control and TPS. Throttle body has 88 MM bolt holes pattern (Mustang 5.0) and will fit all aftermarket intake manifolds designed for Mustan...
Sale price: $595.95
|
|
More info
|
Brian Crower (For Dual Springs) Spring Seats - Evo 8/9
Brian Crower Springs and Retainers: Brian Crower Spring and Retainers
* Valvesprings
Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...
Sale price: $67.95
|
|
More info
|
Brian Crower 30.5mm Exhaust Valves - Evo 8/9
Brian Crower Valves: Brian Crower Valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. Dished head for added weight savings and increased valve control at high rpm. Standard and oversize head.
Part Number: BC3101
...
Sale price: $167.95
|
|
More info
|
Brian Crower 31.5mm Exhaust Valves - Evo 8/9
Brian Crower Valves: Brian Crower Valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. Dished head for added weight savings and increased valve control at high rpm. Standard and oversize head.
Part Number: BC3105
...
Sale price: $167.95
|
|
More info
|
Brian Crower 34mm Intake Valves - Evo 8/9
Brian Crower Valves: Brian Crower Valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. Dished head for added weight savings and increased valve control at high rpm. Standard and oversize head.
Part Number: BC3100
...
Sale price: $167.95
|
|
More info
|
Brian Crower 35mm Intake Valves - Evo 8/9
Brian Crower Valves: Brian Crower Valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. Dished head for added weight savings and increased valve control at high rpm. Standard and oversize head.
Part Number: BC3104
Sale price: $167.95
|
|
More info
|
Brian Crower Crankshaft 4G63 7 bolt 102mm Stroke 4340 Billet - Evo 8/9
Brian Crower Crankshaft: Brian Crower billet cranks are CNC machined on state-of-the-art mills from round bar, premium 4340 chromoly steel to ensure the strongest possible shaft available. Each Brian Crower crankshaft is nitrided for added longevity and feature large radius journals for added str...
Sale price: $2193.95
|
|
More info
|
Brian Crower Dual Valve Springs - Evo 8/9
Brian Crower Springs and Retainers: Brian Crower Spring and Retainers
* Valvesprings
Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...
Sale price: $250.95
|
|
More info
|
Brian Crower EVO Connecting Rods
Crower connecting rods can take about all the abuse you can throw at them.
These will support 600+ HP applications and the price is more then cost
effective.
Fits: Mitsubishi Lancer Evolution 8, 9
Par...
Sale price: $524.95
|
|
More info
|
Brian Crower I Beam Connecting Rods w/ Fasteners (Set of 4) - Evo 8/9
Brian Crower Pro Series Connecting Rod (Set of 4): Made from premium, 4340 steel billet material, Brian Crower connecting rods are available in two distinct styles depending on horsepower, budget and engine application, but both include the exclusive Brian Crower oiling groove in the pin bushing ...
Sale price: $834.95
|
|
More info
|
Brian Crower Pistons - Evo 8/9
To form the ultimate Stroker Kit use with BC Crankshafts with the corresponding connecting rod and piston combination. The Brian Crower stroker kit delivers a system matched setup that installs correctly the first time.
Although specific differ from kit to kit, you can be sure each...
Sale price: $3380.95
|
|
More info
|
Brian Crower Single Titanium Retainer - Evo 8/9
Brian Crower Springs and Retainers: Brian Crower Spring and Retainers
* Valvesprings
Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...
Sale price: $197.95
|
|
More info
|
Brian Crower Single Valve Springs (set of 16) - Evo 8/9
Brian Crower Springs and Retainers: Brian Crower Spring and Retainers
* Valvesprings
Designed for high rpm, Brian Crower valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures (chamfer, debur, etc...
Sale price: $92.95
|
|
More info
|
Brian Crower Springs & Retainers: EVO 8/9
The new single valve spring delivers 15% more pressure across the board than the factory part.
Also, with a coil bind of 0.910", the Crower spring allows for more cam lift than factory springs will allow.
Stock O.D., so no machine work is required to the cylinder h...
Sale price: $290.95
|
|
More info
|
Buschur Racing 2.4L Stage 3 Engine Build Kit - EVO 8/9
The Buschur Racing 2.4 engine build kit for the Mitsubishi Evolution 8/9 is a top of the line offering. This kit comes to you with everything needed for you or your machine shop to assemble your new 2.4 liter engine.
The parts that are used in this kit are among the top engine inte...
Sale price: $2995.00
|
|
More info
|
Buschur Racing AC Delete Kit - EVO 8/9
Want to free up a little horsepower and drop a little weight?
The Buschur Racing EVO AC Delete kit allows you to remove your AC components from your Lancer Evolution.
Included is a quality belt needed to remove the AC compressor and run your other components as well...
Sale price: $73.95
|
|
More info
|
Buschur Racing Baffled Oil Pan - EVO 8/9
We have taken the stock oil pan and built baffling into the oil pick up area of the pan.
By doing this it severely decreases the oil being sloshed around in the pan and keeps the pick up tube submersed in oil.
This is important in any hard G-force situation, dra...
Sale price: $389.00
|
|
More info
|
Buschur Racing Custom Dual Valve Spring and Retainer Set - EVO 8/9
Buschur Racing is pleased to have teamed up with Supertech to offer our customers, the same valve springs and titanium retainers that we have had produced for our Stage 3 cylinder heads.
Supertech Performance is best known for high performance valves, and valvetrain components. Wit...
Sale price: $390.00
|
|
More info
|
Buschur Racing HLA Pressure Regulator - EVO 8/9
- Actively Regulates Lash Adjuster Supply Pressure to a Constant 15psi.
- Accomplishes this by Restricting Flow Instead of Dumping Extra Pressure like the JDM Regulator.
- Reduces Oil Flow Into the Head, Keeps More Oil in the Pan.
- In Some Instances can Greatly I...
Sale price: $175.00
|
|
More info
|
Carrillo Pro-A 3/8 WMC Bolt Connecting Rods - EVO 8/9
Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material,
Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be
the best product t...
Sale price: $845.95
|
|
More info
|
Clevite Main Bearing Set - EVO 8/9
Clevite bearings are intended for high-revving engines, especially those where the high RPMs cause the rod bores to narrow. To compensate for this distortion, they have higher eccentricity and a high crush factor.
P-Series bearings are built on hardened-steel backings with extra-t...
Sale price: $148.95
|
|
More info
|
Clevite Rod Bearing Set - EVO 8/9
Clevite bearings are intended for high-revving engines, especially those where the high RPMs cause the rod bores to narrow. To compensate for this distortion, they have higher eccentricity and a high crush factor.
P-Series bearings are built on hardened-steel backings with extra-t...
Sale price: $56.95
|
|
More info
|
Cometic 85mm / 0.051 MLS Metal Head Gasket - EVO 8/9
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance.
The outer layers of the gasket are embossed and coated on both sides with a flouroelas...
Sale price: $81.95
|
|
More info
|
Cometic 85mm Bore .036 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $81.95
|
|
More info
|
Cometic 85mm Bore .040 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $84.95
|
|
More info
|
Cometic 85mm Bore .045 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $82.95
|
|
More info
|
Cometic 86.0mm / 0.051 MLS Metal Head Gasket - EVO 8/9
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance.
The outer layers of the gasket are embossed and coated on both sides with a flouroelas...
Sale price: $85.95
|
|
More info
|
Cometic 86mm Bore .036 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $81.95
|
|
More info
|
Cometic 86mm Bore .040 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $75.95
|
|
More info
|
Cometic 86mm Bore .045 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $82.95
|
|
More info
|
Cometic 86mm Bore .066 inch MLS Head Gasket - EVO 8/9
Cometic Head Gaskets are developed with the performance enthusiast in
mind. With so many individual requirements for each motor Cometic offers
a number of options to suit your specific motor and needs.
*MLS*
The Cometic MLS gasket is comprised of three layers of...
Sale price: $105.95
|
|
More info
|
Cometic Head Gasket .070 inch - Evo 8
Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor Cometic offers a number of options to suit your specific motor and needs.
Thickness: .070in
Bore: 86mm
Fits: Evo 8
Part Numb...
Sale price: $125.99
|
|
More info
|
Cosworth Crankshaft - EVO 8/9
We are pleased to announce the release of our new light weight racing stroker crankshaft for the Mitsubishi 4G63.
This part is special order only. Please allow at least 4-8 weeks delivery
time. No express shipping is available on this part.
Sale price: $3610.00
|
|
More info
|
Cosworth Crankshaft Oil Scraper - EVO 8/9
The Cosworth 4G63 Crankscraper is engineered to reduce parasitic drag on the crankshaft caused by oil accumulation that surrounds the crankshaft during rotation.
This part is special order only. Please allow at least 4-8 weeks delivery
time. No express shipping is available ...
Sale price: $73.95
|
|
More info
|
Cosworth Forged Steel Connecting Rods - EVO 8/9
The connecting rod is the vital link between the piston and power. When engine output is increased, the demands placed on the connecting rod increase as well.
This part is special order only. Please allow at least 4-8 weeks delivery
time. No express shipping is available on ...
Sale price: $1274.15
|
|
More info
|
CP Pistons w/Rings - EVO 8/9
CP pistons are designed for oversized valves, high lift camshafts and
available in a variety of compression ratios and bore sizes. All of our products represent the highest quality
and are engineered for maximum power.
Standard Shelf Pistons
Sale price: $653.00
|
|
More info
|
Eagle 4G63 7-Bolt 2.3L Stroker Kit .040 Oversize Pistons - Evo 8/9
Eagle Complete Rotating Assemblies: Eagle Competition Rotating Assembly matches the Eagle "ESP" H-Beam Connecting Rods, 4340 Steel Crankshaft, and Premium Forged Pistons from companies like Arias, JE, and SRP. Competition Assemblies COMPLETE solution and are the perfect choice for the most demand...
Sale price: $1696.25
|
|
More info
|
Eagle Connecting Rods Set - EVO 8/9
Eagle connecting rods can take about all the abuse you can throw at them.
These will support 500+ HP applications and the price is more then cost
effective.
Fits: Mitsubishi Lancer Evolution VIII, IX 2003-2007
Part #
Sale price: $420.00
|
|
More info
|
Eagle Forged Steel Crankshaft - Evo 8/9
Eagle Crankshafts: Eagle Crankshafts feature exceptional strength and quality at a reasonable price. Eagle cranks are forged in a non-twist forging and undergo a multi-stage heat treatment process as well as stress relieving, shot peening, and nitriding. They are magnafluxed and sonic tested to i...
Sale price: $749.25
|
|
More info
|
Ferrea Stainless Steel Valves - Lancer EVO VIII
These valves feature avionics-quality hard chrome along with a specially applied hard tip. Our engineering staff at Ferrea spends countless hours conducting flow bench tests to achieve an optimum balance of flow, velocity and efficiency in the design of this valve. As a result, these valves incor...
Sale price: $379.95
|
|
More info
|
Fluidampr Harmonic Damper: EVO 8/9
After installation of this Fluidampr you will get reduced wear on the
main bearings and timing gear, more stable valvetrain operation, and less chance of crank failure.Using only 3 parts--a laser-welded sealed housing, an internal inertia ring, and a highly viscous silic...
Sale price: $409.95
|
 return to top
|
 |
|
|
|
| Wait! There's More: |
1 |
2 |
3 |
4 |
|
|
|
|
