Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. ARP Head Studs Full Set - EVO 8/9
2. Gates Performance Strong Timing Belt + Balance Belt - EVO 8/9
3. Supertech Black Nitrided Standard Size Exhaust Valve - EVO 8/9
4. Supertech Black Nitrided Standard Size Intake Valve - EVO 8/9
5. Supertech Standard Exhaust Valve Seal - EVO 8/9
6. Supertech Standard Intake Valve Seal - EVO 8/9
7. Mitsubishi OEM Metal Head Gasket - EVO 8
8. AMS Performance Timing Belt Tensioner Tool - EVO 8/9
9. Gates Water Pump - EVO 8
10. Supertech Standard Size Intake Valve Guide - EVO 8/9

Testimonials

I just had the easiest buying experience ever...I've ordered a ton of parts elsewhere and LancerShop was by far, the best. I went to their live chat, checked a part status (Instock), then did a quick and painless transaction over the website. This Ryan guy assisted me in the chat process and was very helpful. You guys Kick A**!!!

Daniel

View All Testimonials

Write Your Own Testimonial

Forced Performance 5R Cam Set: EVO 9

Product Description

Like the 4R grind, the larger 5R grind is very well suited to high RPM operation and is capable of 11krpm with the proper spring setup. The FP5R gives a further increase in upper RPM power over the 4R grind and turbo selection should reflect this extra upper RPM capacity.

There is a slight decrease in idle vacuum, and a slight increase in idle RPM may be required but good idle below 1000rpm is typical.

The FP5R camshaft grinds require a spring upgrade, it is not possible to use the factory retainers or springs due to the increase in the lift to .475" with this grind. Installer must check for coil-bind and retainer/seal contact during assembly.

While most aftermarket pistons allow for adequate piston to valve clearance, checking this clearance is highly recommended in ever case, this need is even greater when using oversize valves.

Fits: Mitsubishi Lancer Evolution IX 2006-2007

Details

Price: $775.00

Purchase Product