|
Product Description
This is a shifter bushing kit that replaces the spongy rubber bushing in the
stock shift cables. Installation is very easy! Takes about 30 minutes to do, and
is the single best mod you can do to tighten up your shifter. With this kit,
your shift feel will be more direct, and lead to quicker more accurate shifting!
The Bushings are CNC machined from solid brass, and fit perfectly! Included is a
small piece of emery cloth so that you can properly clean any rust off your
shift pins prior to installation. Instructions include detailed pictures to make
installation a snap. We are the only EVO shop to carry this kit. Fits Mitsubishi
Lancer Evolution VIII Customer Testimonial: "I installed mine tonight and can
say that there is indeed a difference. The shifts are more "rifle bolt" like and
crisper. Any flex from the rubber bushings is gone. Once you shift into gear the
lever will not move or flex forward anymore as with the stock bushings. It slots
home with reassurance."
Recently there has been some misinformation being spread about these
bushings. Some people claim the metal on metal reacts to the shifter cables
causing them to seize up. We spoke to the manufacturer about this, and this is
what they had to say. " These are made from 360 Naval Brass, well know for its
corrosion resistant and self-lubricating properties. I have taken out the
tranny of several cars to do clutch jobs that have our bushings in them, and
there has never even been a slight corrosion on them. They rotate both on the
pin and in the cable end. If they were made from steel, they would rust and be
a mess in no time! We specifically make them from brass to combat this...
Brass barstock costs about 3 times more than steel would..."
Fits: Mitsubishi Lancer Evolution VIII, IX MR (6 speed models only)
TECH TIP:
Click Here For
EVO Shifter Install Guide....
Part # S650
|
DSS Carbon fiber 2-Piece Rear Driveshaft - EVO X
