|
Wait! There's More: |
|
1 |
2 |
3 |
4 |
|
More info
|
Full Blown Cast 70mm Throttle Body - EVO 8/9
No more sending in your core!! We're proud to announce the completion of the FBM Mitsubishi Evo 8-9 Pro-V throttle body. We realized that there was a need for an affordable throttle body with an OEM look and superior quality. We have done extensive tests on the prototypes to ensure that there are...
Sale price: $298.95
|
More info
|
Gates Performance Balance Belt - EVO 8/9
GATES BALANCE SHAFT BELT, BLACK -- 0.32 in. pitch, 20.48 in. pitch
length, 0.5 in. top width, 65 modified curvilinear III teeth; Made from
highly saturated nitrile; Features high tensile strength cord
construction that minimizes stretch; Aramid reinforced nylon jackets and
backside jacket...
Sale price: $25.95
|
More info
|
Gates Performance Serpentine Belt - Mitsubishi Evolution 2003-2006
Standard Automotive V-Ribbed Belt by Gates! Gates Micro-V Belts feature an exclusive truncated rib profile that makes it more flexible than a conventional V-ribbed belt, especially on extra-high speed, small-diameter sheave drives. Also, the shortened rib profile keeps the multi-ribbed belt from ...
Sale price: $55.95
|
More info
|
Gates Performance Strong Timing Belt - EVO 8/9
Gates performance timing belts were built specifically for modified turbocharged
engines and provide 300% more heat resistance than the stock OEM belt.
Gates performance timing belts also have 200% more belt tooth integrity than
a stock OEM bel...
Sale price: $227.95
|
More info
|
Gates Timing Belt Idler Pulley - Mitsubishi Evolution 2003 - 2006
Genuine Gates Performance part!
More info
|
Gates Timing Belt Tensioner - Mitsubishi Evolution 2003 - 2006 2.0L
Hydraulic Cylinder Type - No Pulley Attached.
$231.95
Sale price: $104.95 save 55%
More info
|
Go Fast Bits Under-Drive Crank Pulley w/Belt - EVO 8/9
New from GFB is the Under-drive Crank Pulley for the Mitsubishi EVO
IV through to IX. Like all GFB pulleys the material used is 6000 series
aluminium alloy billet which nets a large weight saving of 1.4 kg over
the factory pulley without sacrificing strength or reliability.
Th...
Minimal Advertised Price:
$253.27
|
More info
|
GReddy EVO Oil Cooler Kit
GReddy/GREX Oil Cooler Kits help prolong the life of your oil and in turn
your internal engine components.
Hard driving causes higher engine temperatures. GReddy/GREX oil coolers are
an excellent addition, and are especially effective in harsh driving
environments.
Sale price: $682.95
|
More info
|
GReddy EVO Super Strong Timing Belt
Engineered to increase heat-resistance, flexibility and durability, GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consist...
Sale price: $179.95
|
More info
|
GReddy Super Strong Balance Belt - Lancer EVO
Engineered to increase heat-resistance, flexibility and durability, GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consist...
Sale price: $67.95
|
More info
|
GSC 4G63T Single Beehive Spring Set - EVO 8/9
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest ...
Sale price: $211.95
|
More info
|
GSC Beehive Valve Springs w/ Titanium Retainer Valvetrain Kit - EVO 8/9
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest ...
Sale price: $391.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $122.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $121.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best
performance longest lasting valves available to the aftermarket. Using
advanced 3D design and simulation programs we have created a stronger
and higher flowing valve head design. We flow test prototype valve heads
in the speci...
Sale price: $121.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $122.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $16.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $16.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $16.95
|
More info
|
GSC Chrome Polished Stem Exhaust Valve - 30.5mm Head (STD) - EVO 8/9
When creating our new valve line we set out to create the best performance longest lasting valves available to the aftermarket. Using advanced 3D design and simulation programs we have created a stronger and higher flowing valve head design. We flow test prototype valve heads in the specific appl...
Sale price: $16.95
|
More info
|
GSC Manganese Bronze Exhaust Valve Guide - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $6.95
|
More info
|
GSC Manganese Bronze Exhaust Valve Guide Set of 8 - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $55.95
|
More info
|
GSC Manganese Bronze Exhaust Valve Guide Shorty Stopper - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $5.95
|
More info
|
GSC Manganese Bronze Exhaust Valve Guide Stopper Style - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $6.95
|
More info
|
GSC Manganese Bronze Intake Valve Guide - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $6.95
|
More info
|
GSC Manganese Bronze Intake Valve Guide Set of 8 - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $55.95
|
More info
|
GSC Manganese Bronze Intake Valve Guide Stopper Style - EVO 8/9
What we have done is actually quite simple, we made valve guides that fit properly, are easier to install, and shaped to help air flow instead of just copying the OEM design. The GSC Power-Division valve guides are made from true C67410 Manganese Bronze and turned on a dedicated precision CNC tur...
Sale price: $6.95
|
More info
|
GSC Power Division ZERO-TICK Lifters - EVO 8/9
GSC Power-Division ZERO-TICK lifters for the Mitsubishi 4G63's.
GSC's ZERO-TICK lifters utilize a stiffer spring inside to help keep the
lifter at its operating height even when oil pressure is low.
Sold as a set of 16
Fits: Lancer EVO 8/9
Part# 4...
Sale price: $180.95
|
More info
|
GSC Race Balance Shaft - EVO 8/9
Don't let removing your balance shafts shorten your oil pump and engines life!
GSC has a race balance shaft that will go in place of the OEM balance shaft and support the oil pumps operation even at extreme rpms.
The GSC Power Division race balance shaft includes ne...
Sale price: $204.95
|
More info
|
GSC Viton 6.6mm Valve Stem Seal Set - EVO 8/9
GSC Power-Division Viton Valve Stem Seals for the Mitsubishi 4G63T 6.6mm seal set (includes 8 intake and 8 Exhaust). These are an upgrade from the standard OEM material to help cope with the higher heat caused increasing the performance of your engine.
Fits: Lancer EVO 8/9
<...
Sale price: $15.95
|
More info
|
HKS Fine Tune Timing Belt - EVO 8/9
You can maintain perfect valve timing over the stock belt with this hks non-
stretch Kevlar based timing belt.
When the timing belt stretches, the most
critical mechanism of the power source, the valve timing or often called cam
timing, goes out of line, resulted in the...
Sale price: $215.95
|
More info
|
HKS Low Temp. Oil Cooler Thermostat: EVO 8/9/X
Works with the Factory and upgraded oil coolers. Provides low temp. of 75 degree celsius. This part is worth every single penny if your EVO is geared towards performance!
TECH TIP: Direct bolt on! No other parts needed.
Sale price: $79.95
|
More info
|
HKS Valve Springs Set - EVO 8/9
HKS valve springs are stiffer springs specifically designed for use with HKS camshafts.
As valve train dynamics change with the use of high performance cam profiles and greater lift, stiffer valve springs are needed to optimize valve movement.
When changing to a hi...
Sale price: $225.95
|
More info
|
HLA Pressure Regulator - EVO 8/9
- Actively Regulates Lash Adjuster Supply Pressure to a Constant 15psi
- Reduces Oil Flow Into the Head, Keeps More Oil in the Pan
- Air Bleed
at the Highest Point Helps Oil Quality and Aeration to Lash Adjusters
- Fits all 4G63
Part# HLA_UNIV
Sale price: $174.95
|
More info
|
JE Pistons (set of 4) Evo 8/9
Part Number: 270667
Fits: Evo 2002 to 2006
JE Pistons - Sport Compact: JE Pistons are specifically engineered for extreme applications up to, and including, professional competition. In this environment, higher compression ratios, extreme boost levels and heavy nitro...
Sale price: $597.95
|
More info
|
JE Pistons Set - EVO 8/9
Stock pistons can often withstand high power levels without failure. However, they also can be easily and instantly broken by unintended but destructive detonation episodes, even momentary ones at high HP levels.
Detonation can occur from a number of factors or combinations of the...
Sale price: $597.95
|
More info
|
JE Pro Seal 85.3mm 0.039in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $89.95
|
More info
|
JE Pro Seal 85.3mm 0.045in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $135.95
|
More info
|
JE Pro Seal 85.3mm 0.051in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $135.95
|
More info
|
JE Pro Seal 86.3mm 0.039in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $92.95
|
More info
|
JE Pro Seal 86.3mm 0.045in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $89.95
|
More info
|
JE Pro Seal 86.3mm 0.051in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $89.95
|
More info
|
JE Pro Seal 87.5mm 0.039in Headgasket - EVO 8
JE Pro Seal Gaskets are manufactured to a higher standard than typical MLS head gaskets. JE Pro
Seal gaskets are manufactured from layers of stainless steel that are taken from raw format, cut
into sheets, and laser cut into a preliminary shape. Each layer is then put through a multi stage
...
Sale price: $92.95
|
More info
|
K1 Technologies 100mm Billet Crank - EVO 8
Forged and Billet 4340 Steel Crankshafts. Material properties are closely monitored for optimum performance. Counterweight placements designed for improved crankshaft performance.
.125" fillet radii. Nitrided for improved bearing life. Straight hole oiling system for better lubric...
Sale price: $1327.95
|
More info
|
K1 Technologies 100mm Lightweight Billet Crank - EVO 8
Forged and Billet 4340 Steel Crankshafts. Material properties are closely monitored for optimum performance. Counterweight placements designed for improved crankshaft performance.
.125" fillet radii. Nitrided for improved bearing life. Straight hole oiling system for better lubric...
Sale price: $1521.95
|
More info
|
K1 Technologies 88mm Billet Crank - EVO 8
Forged and Billet 4340 Steel Crankshafts. Material properties are closely monitored for optimum performance. Counterweight placements designed for improved crankshaft performance.
.125" fillet radii. Nitrided for improved bearing life. Straight hole oiling system for better lubrica...
Sale price: $1327.95
|
More info
|
K1 Technologies 97mm Lightweight Billet Crank - EVO 8
Forged and Billet 4340 Steel Crankshafts. Material properties are closely monitored for optimum performance. Counterweight placements designed for improved crankshaft performance.
.125" fillet radii. Nitrided for improved bearing life. Straight hole oiling system for better lubric...
Sale price: $1364.95
|
More info
|
Kaaz Rear LSC - Evo 8/9
With a normal differential, which a majority of the cars today are factory fitted with, the operation is very basic. The differential simply separates the power from the engine to the two wheels giving the wheel which is simpler to run more power so that the two wheels are running at different sp...
Sale price: $1347.95
|
More info
|
King Main Bearings - EVO 8/9
Racing is the ultimate laboratory for testing our bearings. The loads engine bearings experience in pushing a ground - shaking race car down a quarter mile in four seconds, or launching 10,000 lbs. of truck 15 feet in the air, are enormous.
At KING Engine Bearings, they learn...
Sale price: $62.95
|
More info
|
King Performance Main Bearing Set 0.25mm - EVO 8/9
Proper support via upgraded main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components. Bearings with extra oil clearance will absorb the stress of higher horsepower motors greater, but will see increased wear during start up.
Fits...
Sale price: $64.95
|
More info
|
King Performance Main Bearing Set Standard - EVO 8/9
Proper support via upgraded main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components. Bearings with extra oil clearance will absorb the stress of higher horsepower motors greater, but will see increased wear during start up.
Fit...
Sale price: $98.95
|
More info
|
King Performance Rod Bearing Set 0.25mm - EVO 8/9
When doing rods and pistons, it's a good idea to replace the rod bearings as well. Proper support via main bearings is crucial to prevent oscillations and wear that can damage the crankshaft and other components if the motor should move out of balance. King HP or XP rod bearings will prevent fati...
Sale price: $42.95
|
More info
|
King Performance Rod Bearing Set Standard - EVO 8/9
Your high performance engine build deserves the most advanced internal components designed to withstand the highest loads and RPMs. So what makes King Engine Bearings track tough and street smart? All King bearings are designed with the closest wall tolerances in the industry, with all shells mat...
Sale price: $55.95
|
More info
|
King Rod Bearings - EVO 8/9
Racing is the ultimate laboratory for testing our bearings. The loads engine bearings experience in pushing a ground - shaking race car down a quarter mile in four seconds, or launching 10,000 lbs. of truck 15 feet in the air, are enormous.
At KING Engine Bearings, they learn...
Sale price: $31.95
|
More info
|
King Rod Bearings - EVO 8/9
The HP series was developed mainly for drag race applications needing a material that is harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short duration and still offer higher embedabilty and compatibility. In response, KING developed ...
Sale price: $31.95
|
More info
|
Mahle PowerPak Piston and Ring Kit - EVO 8
Mahle's PowerPak piston assemblies include forged pistons, piston rings,
pins, and wire locks--all in one race-proven package.
The pistons are hand-deburred and then coated with dry phosphate to protect
against ring micro-welding and pin galling during initial startup. For
additiona...
Regular price:
$577.95
Sale price: $477.95 save 17%
|
More info
|
Manley 16pc Valve Springs - Evo 8/9
Manley Sport Compact - Pro Series Valve Springs: Manley Performance valve springs are specifically designed to withstand the rigors of today's aftermarket Sport Compact camshafts and properly control the valve train in these high revving Sport Compact engine applications. This means utilizing onl...
Sale price: $96.95
|
More info
|
Manley 4340 Billet Stroke Turbo Tuff Series Crankshaft
Fully machined "Turbo Tuff Series" billet for high horsepower/ high boosted applications
- 4340 Billet
- Multi-step heat treatment process
- Stress Relieved and Shot Peened
- Nitrided
- 100% Magnafluxed
- Special teardrop diagonal oiling
-...
Sale price: $1750.95
|
More info
|
Manley 6.56mm Bead Loc Valve Locks (8pc) - Evo 8/9
Manley Sport Compact - Pro Series Valve Locks: Look no further for the absolute premium valve locks in the Sport Compact industry. Manufactured from premium quality heat treated steel and machined to exacting tolerances, Manley locks fit the valve and retainer the way they are supposed to fit! Wh...
Sale price: $54.95
|
return to top
|
|
|
|
Wait! There's More: |
|
1 |
2 |
3 |
4 |
|
|
|
|