AGP Front Mount Intercooler: EVO X :: EVO 8/9 Fuel Parts :: Fuel :: LancerShop.com</title>
Search
 Home   Help   Testimonials   New Arrivals   View Cart   Install Tips 
Categories
Air Intake
Accessories
Blow Off Valve
Boost Controllers
Brakes
Clutch - Trans
Electronics
Engine
Exhaust
Exterior
Fuel
Gauges
Intercooler
Interior
Maintenance
Suspension
Turbo
Wheels

Deals of the Day

Bestsellers
1. Walbro 255 Fuel Pump w/Install Kit - EVO 8/9
2. AEM High Volume Fuel Rail - EVO 8/9
3. Mitsubishi OEM In Tank Fuel Filter: EVO 8/9
4. Walbro EVO 255 Fuel Pump Only
5. AEM 340LPH In Tank Fuel Pump Kit
6. AMS Fuel Rail - EVO 8/9
7. Full Blown 90 Degree Swivel Hose End
8. Walbro EVO Fuel Pump Install Kit
9. Apexi S-AFC NEO (Digital Fuel Controller)
10. Deatschwerks 300+ LPH In-Tank Fuel Pump w/Kit - EVO 8/9


Testimonials
Hi Heather,
While things do not always go according to plan sometimes,
it has been very re-assuring that you have taken the time to ensure your customer was totally satisfied, there was late
delivery on my end with my freight forwarder but also there was a trust between lancershop & the customer (myself) n this case.
Lancershop could have easily said that the issue is outside the company policy of 30 days after purchase was made.
However you still took the time to investigate my claim & the honesty level of accepting that i have received half the
items purchased. This situation does represent a high sense of integrity in what you do & i applaud you & Lancershop
for demonstrating such. Thank you for the excellent customer service even with the previous carbon parts coming from
china/japan............ i do look forward to doing business with you again in the future.
Robert Honore
(iCretae Events Ltd)

View All Testimonials

Write Your Own Testimonial


Recently Viewed
Mitsubishi OEM Hood Clip - EVO X Mitsubishi OEM Hood Clip - EVO X
ATi Dual Steering Column Gauge Pod - EVO 8/9 ATi Dual Steering Column Gauge Pod - EVO 8/9

Gift Cards
Gift certificates


TRENDING: Rexpeed | AMS | Ultimate Racing | Engine Parts | Buschur Racing


LancerShop.com :: Fuel :: EVO 8/9 Fuel Parts :: AGP Front Mount Intercooler: EVO X

AGP Front Mount Intercooler: EVO X

AGP Front Mount Intercooler: EVO X

AGP Front Mount Intercooler: EVO X 

Product Description

AGP Front Mount Intercooler: EVO X

Part # AGP-EVOX-FMIC

Fits: Lancer EVO X 2008+

Enhance the performane of your 2008-up Mitsubishi Evolution X with the first front mount intercooler available, and now with cast end tanks! The AGP Turbo FMIC features cast aluminum end tanks attached to a 20"x13"x3.5" bar and plate core. This core has the largest surface area of any other core on the market. This assembly fits perfectly in the factory location and does NOT require you to remove or trim any portion of the stock bumper support. It also clears the factory lower under-tray so you do not need to remove it. It cools at 90-99% efficiency under almost all conditions and has less than .75psi pressure drop at 450 hp of airflow. You couldn't heat soak this intercooler if you tried.

Stop asking who manufactures our core for us. We're tired of explaining it, and we're not going to tell you. All you need to be concerned with is that you're getting the best intercooler for your Evo X. Look up reviews, look up dyno numbers, look up track times. Our intercooler steps it up and delivers.

Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock) around 5000rpm with the factory intercooler and 91 octane gas, where the power would drop. Since we upgraded to this intercooler, we've noticed consistent power across the board due to a cooler air charge. Back to back pulls on the dyno now result in identical power curves due to no heatsoak. This is a great upgrade for a stock Evo X, and will help you make more and more power down the road as we continue to release products.

Dyno results showed peak gains of 20 ft/lbs and 25 whp, and nowhere did it lose power throughout the entrire RPM range. These tests were done on a car with a stock turbo, minor bolt ons, and a very conservative ECUTEK tune.

This is the same intercooler we run on our shop car, which so far has made over 530whp and trapped 11.55 @ 123.

The FMIC includes:

20"x13"x3.5" bar and plate core with cast end tanks weighing in at 24.5 lbs.
Silicone hoses and clamps
All necessary installation hardware
**2010 models will require a new mounting bracket as Mitsubishi decided to change the lower intercooler mount. $25**

Available with a black heat dispersion coating that helps "pull" the heat from the intercooler core- aiding with thermal transfer and increasing intercooler efficiency.

Available with the AGP logo stencil that will allow you to paint our logo on the intercooler any color you like.  We recommend using brake caliper paint, it seems to hold up the longest.



Details

Price: $731.95

Purchase Product

 
Logo Stencil:
2010+ Model:
Heat Dispersion Coating:
Qty        

 


Related Options

 


Customers Also Bought
Customers who bought this item also bought...
Ultimate Racing Lower Intercooler Pipe Kit - EVO X
Ultimate Racing Lower Intercooler Pipe Kit - EVO X
Torque Solution Shorty Billet Antenna - EVO X GSR 08-11
Torque Solution Shorty Billet Antenna - EVO X GSR 08-11
Swift Spec-R Sport Lowering Springs - EVO X
Swift Spec-R Sport Lowering Springs - EVO X
WORKS Hybrid Shifter Cable Bushings - 2008 EVO X
WORKS Hybrid Shifter Cable Bushings - 2008 EVO X
 
 
Online Users
» 5195 Shoppers

Your cart
Welcome to LancerShop! In order to shop with us, you must create an account.

Your Cart is Empty!
» View cart
» Checkout
» Wish list
» Where's my stuff?

Your Account
Username

Password


Remember Me
Recover password

If Javascript is disabled in your browser click here


Help

» Sales Inquiries
» Contact us
» Privacy statement
» Recover password


 
  1-888-554-6447 -- [email protected]  -- URL: https://www.LancerShop.com
© 2002-2024 LancerShop.com. All Rights Reserved.
 
Password JDM