|
|
LancerShop.com | Lancer Performance Parts and Accessories :: Fuel :: EVO 8/9 Fuel Parts
|
|
 |
| Wait! There's More: |
1 |
2 |
 |
|
More info
|
AEM 320LPH In Tank Fuel Pump Kit
AEM’s High Flow In-Tank Fuel Pump is designed for high performance
naturally aspirated and forced induction EFI vehicles. It delivers
reliable performance and high volumes of fuel flow for roughly half the
cost of comparable performance fuel pumps.
The AEM High Flow In-Tank F...
Our price: $99.98
|
|
More info
|
AEM High Volume Fuel Rail - EVO 8/9
AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower.
This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is include...
Our price: $131.67
|
|
More info
|
Aeromotive 340 Stealth In-Tank Fuel Pump
The Aeromotive 340 Stealth Pump is a high output, in tank drop in electric fuel pump that is direct fit for the Lancer Evolution 8/9.
The Aeromotive Stealth 340 has superior flow throughout a wide pressure range. The 340 has over 30% more flow than stock pumps and is perfect for a...
Our price: $146.95
|
|
More info
|
Aeromotive Fuel Pressure Regulator
-6 AN fittings on inlets and outlet. Base pressure regulator is adjustable
from 30 to 70 PSI.
Provides two inlet ports and one return port. Fuel pressure will rise on a 1:1
ratio when referencing boost. 1/8" NPT gauge port. The clear anodized finish on
the body co...
Our price: $144.95
|
|
More info
|
Agency High Flow Red Fuel Rail
Agency Power has released their new Mitsubishi EVO VIII and MR fuel rail.
This fuel rail is a direct replacement for the factory unit. The CNC machined
piece is anodized in Agency Power Red. It fits with the stock fuel pressure
regulator and fittings and can be set up to work with a...
Our price: $175.00
|
|
More info
|
AMS 1000 HP Fuel System : EVO 8/9
The
AMS Mitsubishi Evolution VIII/IX 1000 HP Evo fuel system is the
best alternative to a fuel cell. Our system retains the stock fuel tank
so there is no need to cut up your EVO to fit a fuel cell. Featurin...
Our price: $1944.95
|
|
More info
|
AMS EVO Fuel Pressure Regulator Kit - Evo 8/9
This kit is designed for anyone running a larger then factory fuel pump and
or injectors. Whether you are running too much fuel and need to back off the
pressure, or if you are on the edge of your current injectors and need to raise
base fuel pressure. This is the system for you! Comes i...
Our price: $309.95
|
|
More info
|
AMS EVO Fuel Surge Tank System
The OEM fuel tank on an EVO is known to starve the fuel pump when less than a
¼ tank full during hard G-forces. The AMS surge tank prevents fuel starvation
due to hard cornering, braking, and acceleration. The unit stores fuel to feed
the in-line pump in case the supply in the OEM tank is i...
Our price: $929.95
|
|
More info
|
AMS Fuel Rail - EVO 8/9
AMS is proud to offer a CNC'd aluminum fuel rail for the Evolution VIII/IX. The AMS
fuel rail provides increased fuel flow which is necassary when running more
boost. The rail comes either anodized in Red, Silver, or Black and includes the AMS
flame/turbo logo CNC'd into the face.
...
Our price: $189.95
|
|
More info
|
AMS Race Fuel Rail - EVO 8/9
The
AMS EVO 8/9 Race Fuel Rail provides increased fuel flow which is
necessary at higher boost levels. This CNC’d aluminum rail comes
anodized in Red, Black or Silver and includes our signature AMS turbo
l...
Our price: $199.95
|
|
More info
|
Apexi S-AFC NEO (Digital Fuel Controller)
Being able to properly tune is of utmost importance for extracting peak
performance from your EVO's setup.
The S-AFC NEO allows you to monitor Karman Hz (on the Evo), throttle
position, correction factor, RPM, knock level, and battery voltage.
Our price: $469.95
|
|
More info
|
ATP Adjustable Fuel Pressure Regulator for Stock Rail - EVO 8/9
Replaces stock FPR and bolts directly to stock EVO fuel rail. Allows adjustments up to 5 bar (75 psi) base fuel pressure.
Useful for fine tuning or increase fuel injector capacity to support additional power without changing out to marginally larger set of injectors.
Our price: $169.00
|
|
More info
|
Bolt On Billet -6 AN Feed Fitting - Lancer EVO
This billet fitting bolts onto the factory/Perrin EVO fuel rail without welding, glue or modifications. Allows you to attach a -6AN line directly to the rail when doing a system upgrade.
Fits: Mitsubishi Lancer Evolution VIII
Our price: $29.95
|
|
More info
|
Bolt On Billet -6 AN Return Fitting - Lancer EVO
This billet fitting bolts onto the factory/Perrin EVO fuel rail without welding, glue or modifications. Allows you to attach a -6AN line directly to the rail when doing a system upgrade.
Fits: Mitsubishi Lancer Evolution VIII
Our price: $29.95
|
|
More info
|
Boomba Racing Fuel Rail - EVO 8/9
Fuel Rail is specially designed for Mitsubishi Evo VII-IX. The rail is made of CNC machined aluminum. It is available in natural aluminum, red, blue or black anodized finish. The wider diameter of this rail allows bigger fuel amount to be supplied to the injectors, enhancing engine performance. T...
Our price: $129.00
|
|
More info
|
Boomba Racing Fuel Rail Adapter Fittings - EVO 8/9
A must for everyone building custom fuel system or using aftermarket fuel pressure regulators. It adapts standard EVO VIII-IX fuel rail inlet and outlet ports to AN-6 threaded female port. Kit contains one inlet and one outlet adaptor. Available in red, black or natural finish.
Fit...
Our price: $49.95
|
|
More info
|
Boomba Racing Super Performance Fuel Rail - EVO 8/9
Super Performance Fuel Rail designed for Mitsubishi Evo VII-IX allows very high fuel flow. It is equipped with 3/8 NPT ports at both ends and 1/8 NPT gage port. It requires addition of aftermarket fuel pressure regulator. The rail is made of CNC machined aluminum. It is available in natural alumi...
Our price: $129.00
|
|
More info
|
Bosch 044 Fuel Pump - Universal Fitment
The Bosch 044 fuel pump provides 300LPH of flow and operates at an amazing 72.5PSI.
Bosch 044 fuel pumps are comparable to the Walbro 255LPH high pressure inline fuel pumps which can both support vehicles for up to 600-700 horse power.
Can be used in sequence with ...
Our price: $239.95
|
|
More info
|
Buschur Racing -AN Double Pumper Fuel System - EVO 8/9
This is the newest addition to our line up of fueling options for the
Evolution. This double pumper is designed to work with a custom fuel
line setup using -6AN fittings. This is a TRUE drop in setup and it is
all done while retaining the sending unit.
No modification is needed to ...
Our price: $665.00
|
|
More info
|
Buschur Racing Double Pumper Fuel System - EVO 8/9
This is the newest addition to our line up of fueling options for the Evolution. This is a TRUE drop in setup and it is all done while retaining the stock fuel lines and sending unit. No modification is needed to run this.
Our price: $715.00
|
|
More info
|
Chase Bays AN Fuel Line Kit - EVO 8/9
If you've ever looked at your stock fuel system on your EVO then you already know its ridiculously cluttered, and doesn't work well when you upgrade your fuel rail. Thats just one of the reasons why we've developed this AN Fuel Line Kit. This product saves weight, eliminates clutter, looks incred...
Our price: $149.95
|
|
More info
|
CNT Racing 340LPH Fuel Pump w/Kit - EVO 8/9
CNT Racing fuel pumps are a direct install replacement for the stock fuel pump. Each fuel pump includes an installation kit with the hardware required for a professional or do it yourself installation.
Please note that these fuel pumps may be smaller that your stock fuel pump. The...
Our price: $110.00
|
|
More info
|
CNT Racing High Pressure 255LPH Fuel Pump
CNT Racing High Pressure 255LPH Fuel Pump
A high pressure fuel pump is definitely not something you should over look when it comes to performance upgrade to your vehicle. The CNT Racing High Pressure fuel offers 255 LPH (liters per hour) or 300 LPH (liters per hour) to your desire....
Our price: $69.95
|
|
More info
|
CNT Racing High Pressure 300LPH Fuel Pump
CNT Racing High Pressure 300LPH Fuel Pump
A high pressure fuel pump is definitely not something you should over look when it comes to performance upgrade to your vehicle. The CNT Racing High Pressure fuel offers 255 LPH (liters per hour) or 300 LPH (liters per hour) to your desire....
Our price: $89.95
|
|
More info
|
DeatschWerks (High Impedance) 1000cc Injectors - EVO 8/9
All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. For our customers, this means better fitment, easier tuning, and increased reliability. All injectors are backed with a comprehensive 12-month warrant...
Our price: $489.00
|
|
More info
|
DeatschWerks (High Impedance) 1300cc Injectors - EVO 8/9
All Deatschwerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. For our customers, this means better fitment, easier tuning, and increased reliability. All injectors are backed with a comprehensive 12-month warrant...
Our price: $549.00
|
|
More info
|
Deatschwerks 750cc Low Z Top Feed Injectors Set of 4 - EVO 8/9
All Deatschwerks high flow fuel injectors are built using only quality
OEM cores. In addition, each set is balanced to within a 2% flow
variation. For our customers, this means better fitment, easier tuning,
and increased reliability. All injectors are backed with a comprehensive
12-month...
Our price: $349.00
|
|
More info
|
Deatschwerks Fuel Pump Hardwire Kit
Get the most out of your DW301 or other high flow fuel pump with the Deatschwerks Fuel Pump Hardwire Kit, by ensuring it is getting the voltage it needs.
Old, compromised OE wiring can limit the voltage your fuel pump receives. The Deatschwerks hardwire kit includes everything you...
Our price: $39.00
|
|
More info
|
EVO Fuel Upgrade Package COMBO DEAL
The Walbro fuel pump is an ideal upgrade for any EVO that is running more
boost then stock. The in-tank fuel pump makes for a clean, easy installation by
replacing the factory unit. Remember more boost always requires more fuel
to be safe.
Being able to properly tune is...
Market price:
$570.99
Our price: $469.95 save 18%
|
|
More info
|
FIC 1050cc High Flow Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are Peak & Hold / Low Impedance Ball & Seat type injectors and can flow tons of fuel when the throttle is pushed to the max.
Our price: $344.95
|
|
More info
|
FIC 1100cc High Flow Fuel Injectors - EVO 8/9
These EVO injectors are Saturated / High Impedance Ball & Seat type
injectors and can flow tons of fuel when the throttle is pushed to the
max.
TECH TIP: 20% larger than 1000cc
Bosch EV14 injectors. Price includes a full set of (4)...
Our price: $494.95
|
|
More info
|
FIC 1150cc High Flow Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are Peak & Hold / Low Impedance Ball & Seat type injectors and can flow tons of fuel when the throttle is pushed to the max.
Our price: $384.95
|
|
More info
|
FIC 1250cc BlueMAX Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are Peak & Hold / Low Impedance Ball & Seat type injectors and can flow tons of fuel when the throttle is pushed to the ...
Our price: $404.95
|
|
More info
|
FIC 1450cc BlueMAX Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are Peak & Hold / Low Impedance Ball & Seat type injectors and can flow tons of fuel when the throttle is pushed to the ...
Our price: $444.95
|
|
More info
|
FIC 1650cc BlueMAX Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are Peak & Hold / Low Impedance Ball & Seat type injectors and can flow tons of fuel when the throttle is pushed to the ...
Our price: $484.95
|
|
More info
|
FIC 2150cc BlueMAX Fuel Injectors - EVO 8/9
Largest high impedance injector ever! Great linearity and idle will work at elevated fuel pressure.
Best injector for E85 applications!
These EVO injectors are Saturated / High Impedance Ball & Seat type injectors.
Our price: $779.95
|
|
More info
|
FIC 650cc High Flow Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are ball/Disk type injectors and can flow tons of fuel when the throttle is pushed to the max.
Our price: $288.95
|
|
More info
|
FIC 850cc High Flow Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are ball/Disk type injectors and can flow tons of fuel when the throttle is pushed to the max.
$288.95
Our price: $267.95 save 7%
|
|
More info
|
FIC 900cc High Flow Fuel Injectors - EVO 8/9
Custom Modified Saturated/High Impedance Ball & Seat Injectors.
Great for E85 applications! These injectors are the same product that other companies advertise as
1000cc (they use C16 to flow their injectors, which no one else in the
industry does)
Our price: $408.95
|
|
More info
|
FIC 950cc High Flow Fuel Injectors - EVO 8/9
So you need more fuel for the heighten boost levels you are running?
No sweat LancerShop.com has the answer for you.
These EVO injectors are Peak & Hold / Low Impedance Ball & Seat type injectors and can flow tons of fuel when the throttle is pushed to the max.
Our price: $324.95
|
|
More info
|
FIC Fuel Rail -10/-8AN - EVO 8/9
Back by popular demand and even better than before, our Fuel Rails now offer sleek new CNC brackets, while still providing a large internal 11/16” diameter. This increased fuel rail volume, over that of stock rails, ensures that injectors receive equal distribution for optimum balance. The benefi...
Our price: $164.95
|
|
More info
|
FIC Fuel Rail -6AN - EVO 8/9
Back by popular demand and even better than before, our Fuel Rails now offer sleek new CNC brackets, while still providing a large internal 11/16” diameter. This increased fuel rail volume, over that of stock rails, ensures that injectors receive equal distribution for optimum balance. The benefi...
Our price: $149.95
|
|
More info
|
FIC Fuel Rail -8/-6AN - EVO 8/9
Back by popular demand and even better than before, our Fuel Rails now offer sleek new CNC brackets, while still providing a large internal 11/16” diameter. This increased fuel rail volume, over that of stock rails, ensures that injectors receive equal distribution for optimum balance. The benefi...
Our price: $149.95
|
|
More info
|
FIC Fuel Rail Kit -6AN - EVO 8/9
Complete Evo8/9 Fuel Rail Kit sells only in combination with 4 x Evo8/9 Injectors of any size (add cost of injectors to the kit price) and includes: Evo8/9 Fuel Rail (Available in black, red, blue or silver) with -6AN in and outlet fittings, FueLab 51502 fuel pressure regulator in black, Carbon f...
Our price: $329.95
|
|
More info
|
FIC Fuel Rail Kit -8AN - EVO 8/9
Complete Evo8/9 Fuel Rail Kit sells only in combination with 4 x Evo8/9 Injectors of any size (add cost of injectors to the kit price) and includes: Evo8/9 Fuel Rail (Available in black, red, blue or silver) -8AN inlet / -6AN outlet fittings, FueLab 51502 fuel pressure regulator in black, Carbon ...
Our price: $329.95
|
|
More info
|
FIC Resistor Pack Delete Plug - EVO 8/9
Resistor Pack Delete Plug: To avoid cutting and splicing you resistor box harness, simply remove the resistor box and plug in the FIC resistor box delete plug. Easy! For use when replacing OEM or aftermarket low impedance injectors with high impedance injectors.
Suitable for use wi...
Our price: $29.95
|
|
More info
|
Full Blown 180 Degree Swivel Hose End
Full Blown Swivel Hose Ends swivel 360 to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing f...
Our price: $29.95
|
|
More info
|
Full Blown 45 Degree Adapter Fittings
Full Blown wide variety of lightweight aluminum adapter fittings allow for the connection of our hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common compone...
Our price: $14.95
|
|
More info
|
Full Blown 45 Degree Swivel Hose End
Full Blown Swivel Hose Ends swivel 360 to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing f...
Our price: $24.95
|
|
More info
|
Full Blown 90 Degree Adapter Fittings
Full Blown wide variety of lightweight aluminum adapter fittings allow for the connection of our hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common compone...
Our price: $14.95
|
|
More info
|
Full Blown 90 Degree Swivel Hose End
Full Blown Swivel Hose Ends swivel 360 to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing f...
Our price: $24.95
|
|
More info
|
Full Blown Alumninum Weld On Bung
Full Blown wide variety of lightweight aluminum adapter fittings allow
for the connection of our hose ends to almost any component. Adapters
are offered in standard thread, metric thread and pipe thread to fit
most popular oil pumps, fuel pumps, fuel filters plus a variety of other
common...
Our price: $14.95
|
|
More info
|
Full Blown AN Plug Fittings
Full Blown wide variety of lightweight aluminum adapter fittings allow for the connection of our hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common compone...
Our price: $9.95
|
|
More info
|
Full Blown Dual Pump - EVO 8/9
No more sumping the tanks on your HIGH HP cars!! We've designed a CNC Billet hanger that will mount 2 Intake pumps that's a direct drop into factory fuel tank. Our Dual Pump Hanger is CNC machined from top notch billet aluminum then anodized for a long lasting protective finish. It's capable of u...
Our price: $399.00
|
|
More info
|
Full Blown FB290 Fuel Pump - EVO 8/9/X
Our 290 Pump is a high output, in tank electric pump that fits most of the popular late model EFI applications. Lightweight and compact, the unit bolts directly in to most exiting hanger assemblies including our Dual Hanger Setups. Our FB-290 has superior flow throughout a wide pressure range. Th...
Our price: $99.99
|
|
More info
|
Full Blown FB340 Fuel Pump - EVO 8/9/X
Our 340 Pump is a high output, in tank electric pump that fits most of the popular late model EFI applications. Lightweight and compact, the unit bolts directly in to most exiting hanger assemblies including our Dual Hanger Setups. Our FB-340 has superior flow throughout a wide pressure range. Th...
Our price: $159.99
|
|
More info
|
Full Blown Fuel Pressure Regulator - EVO 8/9/X
Billet aluminum Full Blown Fuel Pressure regualtor, black, red, purple anodized finish, adjustable from 20-90psi, vacuum referenced, flow of over 2.5 Gallons Per Minute at 25psi or 1000HP. Features dual inlets and single return, a work of art, don't leave your fuel pressure to some cheap regulato...
Our price: $154.99
|
|
More info
|
Full Blown Straight Adapter Fittings
Full Blown wide variety of lightweight aluminum adapter fittings allow for the connection of our hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common compone...
Our price: $9.95
|
|
More info
|
Full Blown Straight Swivel Hose End
Full Blown Swivel Hose Ends swivel 360 to maximize hose installation allowing for quick alignment of ends after hose assembly. These Full flow swivel hose ends are completely re-usable and feature a unique taper design for ease of installation. Full Flow Swivel hose ends use mandrel bent tubing f...
Our price: $14.95
|
|
More info
|
Full Blown Union Fittings
Full Blown wide variety of lightweight aluminum adapter fittings allow for the connection of our hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel filters plus a variety of other common compone...
Our price: $9.95
|
|
More info
|
GodSpeed Project Fuel Rail - EVO 8/9
This fuel rail upgrade kit is high-performance fuel delivery unit that is designed to properly supply the additional fuel needed for high performance / boost applications. This fuel kit is direct bolt-on replacement of factory fuel rails, this allows tuner to use larger top-feed injectors. ...
Our price: $99.95
|
|
More info
|
Injector Dynamics 1000cc Fuel Injectors - EVO 8/9
Injector Dynamics provide the absolute best fuel injectors available, and have quickly become the standard for tuners and car builders worldwide. Injector Dynamics fuel injectors are the result of batch testing large quantities of specially modified fuel injectors, and then carefully matching the...
Our price: $480.00
|
|
More info
|
Injector Dynamics 2000cc Injectors - EVO 8/9
The ID2000 has set the standard for linearity and control in a large injector.
Flowing in excess of 2000cc/min at 3 bar, the ID2000 will also provide a
smooth stoichiometric idle on small bore engines running E85, and it
will do all this while maintaining strict linearity up to 95% dut...
Our price: $960.00
|
|
More info
|
Injector Dynamics 725cc Fuel Injectors - EVO 8/9
The ID725 exists for all those applications where the ID1000 is just a little bit too big.
The ID725 will maintain strict linearity at flow rates that will satisfy
idle and cruise requirements for even the smallest engines. This makes
the ID725 ideal for emissions compliant OEM applica...
Our price: $480.00
|
|
More info
|
RC Engineering 1000cc Fuel Injectors Set of 4 - EVO 8/9
Capable of handling anything from a moderate street Evo to high horsepower dedicated race builds.
TECH TIP: Low impedance and require tuning to work properly. All RC Engineering fuel injectors for the Evolution 8 & 9 include wiring clips...
Our price: $377.95
|
|
More info
|
RC Engineering 1600cc Fuel Injectors Set of 4 - EVO 8/9
Capable of handling anything from a moderate street Evo to high horsepower dedicated race builds.
TECH TIP: Low impedance and require tuning to work properly. All RC Engineering fuel injectors for the Evolution 8 & 9 include wiring clips...
Our price: $739.95
|
return to top
|
 |
|
|
|
| Wait! There's More: |
1 |
2 |
 |
|
|
Live Help is available M-F 9am-5pm EST
|