|
|
LancerShop.com | Lancer Performance Parts and Accessories :: Intercooler :: EVO 8/9 Intercooler
|
|
 |
|
More info
|
AGP Lower Intercooler Hard Pipe - EVO 8/9
Replace the restrictive factory lower intercooler pipe with one of these new hard pipe kits. The AGP Lower Intercooler Hard Pipe is constructed from 2.5" aluminum mandrel bent tubing and is completed with a highly polished finish. We include a 4 ply silicone reducer and high strength hose clamps ...
Our price: $168.95
|
|
More info
|
AGP Turbo EVO Front Mount Intercooler
Enhance the performance of your 2003-up Mitsubishi Evolution VIII and IX with one of the best front mount intercoolers available. The AGP Turbo FMIC features polished cast aluminum end tanks tig welded to a 24x12x3.5" bar and plate core. This assembly fits perfectly in the factory location and do...
Our price: $524.95
|
|
More info
|
AMS EVO Front Mount Intercooler Upgrade - EVO 8/9
Just like with exhaust, it is important to free up intake restrictions to
allow as much air into the engine as possible for making peak power levels. The
factory front mount intercooler works well, but like anything "stock",
it becomes a restriction as modification levels increase an...
Our price: $749.95
|
|
More info
|
AMS EVO Lower Intercooler Pipe EVO 8/9
This 100% aluminum lower intercooler pipe is a replacement for the
restrictive lower pipe that comes stock on your evo.
The stock pipe makes extra
bends and necks down to less than 1.5" at one point.
The AMS pipe flows
smoothly and without restriction from the...
Our price: $269.95
|
|
More info
|
AMS Upper Intercooler Pipe - EVO 8/9
The AMS Mitsubishi Evolution VIII/IX Upper Intercooler Pipe is a
replacement for the factory cold side piping. It completely replaces all
of the factory pieces from the IC outlet coupler to the throttle body.
Through our extensive parts prototyping and dyno testing programs we
have found ...
Our price: $399.95
|
|
More info
|
Buschur Racing Evolution FMIC (Race Core) - Evo 8/9
This is our largest front mount intercooler that we offer for the Evolution. The core measures in at 24" x 13" x 4". With the addition of this on a 600whp Evolution it picked up 57WHP over a competitors intercooler that was being used previously to this being installed.
Our price: $799.00
|
|
More info
|
Buschur Racing Evolution FMIC (Street Core) - EVO 8/9
We've just completed our new front mount intercooler upgrade for the Mitsubishi Evolution 7/8/9. We've taken all that we've learned regarding air-to-air intercooling over the last 20 years and applied it to this new intercooler package.
Our price: $649.00
|
|
More info
|
Buschur Racing Evolution Upper I/C Pipe Kit - EVO 8/9
This intercooler pipe is made of polished mandrel bent 2.5" 304 stainless steel. Our upper intercooler pipe upgrade eliminates 6 bends and 16" of length thereby reducing the flow restriction (less length, less bends, less restrictive flow).
Our price: $280.00
|
|
More info
|
CBRD Garrett Core FMIC - EVO 8/9
CBRD is proud to announce the release of our 3.8” Garrett Core FMIC for the EVO 8/9
Utilizing custom made tanks, it allows you to retain the stock bumper beam and splash guard without any trimming or cutting. The tank design allows optimal airflow distribution through the core ...
Our price: $850.00
|
|
More info
|
ETS Cusco Power Brace Intercooler - EVO 8/9
The ETS Mitsubishi Evolution Intercooler is the best on the market, bar none. Built to fit behind the Cusco Power Brace. The kit includes the intercooler, mounting hardware, silicone couplers, and SS T-Bolt Clamps. Pressure checked to 35psi
Features:
...
Our price: $498.95
|
|
More info
|
ETS Intercooler Kit - EVO 8/9
The ETS Lancer EVO Intercooler is the best on the market, bar none. It features bolt on installation, eliminates the two up-pipes to the intercooler and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans (3" and 3...
Our price: $914.95
|
|
More info
|
ETS LP2 Lower Intercooler Pipe - EVO 8/9
The
lower intercooler piping is possibly the biggest restriction in the
intercooler system on the Evo. Just by installing the ETS Lower
Intercooler Pipe you will gain 12hp in power and reduced lag time on
initial spool up and improved transient response between gears.
This
pi...
Our price: $191.95
|
|
More info
|
ETS Standard Front Mount Intercooler - EVO 8
The ETS Mitsubishi Evolution Intercooler is the best on the market, bar none. It features bolt on installation and fills the whole grill with core for a killer look and maximum efficiency. This unit also retains the factory crash bar and splash pans on the 3" and 3.5" Intercooler.
...
Our price: $498.95
|
|
More info
|
ETS Titanium Upper Intercooler Piping - EVO 8/9
The ETS Evo Upper Intercooler Pipe is designed to eliminate many of the unnecessary bends in the stock piping that snake around the stock engine bay. Once the air passes through the intercooler, our upper intercooler pipe takes a short direct path around the core support, over the transmiss...
Our price: $499.00
|
|
More info
|
ETS Upper Intercooler Pipe - EVO 8/9
The
ETS Evo Upper Intercooler Pipe is designed to eliminate many of the
unnecessary bends in the stock piping that snake around the stock
engine bay.
Once the air passes through the intercooler, our
upper intercooler pipe takes a short direct path around the core
suppor...
Our price: $284.95
|
|
More info
|
ETS Wide Tank Intercooler - EVO 9
This intercooler was designed for the Evolution 9 front bumper cover. The Evolution 9 has a bumper cover opening of 22" where the standard tank intercooler is a 24" core. We designed the wide tank to have a 22" core and wider end tanks for better air distribution through the cor...
Our price: $498.95
|
|
More info
|
Fujita Charge Pipe Black- EVO 8/9
Includes carbon plated T-bolt clamps; A high quality, direct fit OE
replacement intercooler pipe; Made of powdercoated 6061-T6 aluminum
alloy; Features mandrel-bent tubing and carbon plated T-bolt clamps
which either meet or exceed SAE specification J1508 standard.
Fits: 03-0...
Our price: $136.95
|
|
More info
|
Fujita Charge Pipe Polished - EVO 8/9
Includes
carbon plated T-bolt clamps; A high quality, direct fit OE replacement
intercooler pipe; Made of lightweight and polished 6061-T6 aluminum
alloy; Features mandrel-bent tubing and carbon plated T-bolt clamps that
meet or exceed SAE specification J1508 standard.
Fits...
Our price: $128.95
|
|
More info
|
Greddy Spec-R Front Mount Intercooler w/Lower Pipe - EVO 8/9
The addition of a GReddy intercooler is one of the best ways to safely
increase horsepower in a turbocharged engine. By reducing the engine's
inlet temperatures, a denser air charge will enter the engine; this can
make more horsepower at the same boost level and even more power at
higher ...
Our price: $1377.50
|
|
More info
|
Greddy Spec-V Front Mount Intercooler w/Lower Pipe - EVO 8/9
The addition of a GReddy intercooler is one of the best ways to safely
increase horsepower in a turbocharged engine. By reducing the engine's
inlet temperatures, a denser air charge will enter the engine; this can
make more horsepower at the same boost level and even more power at
higher ...
Our price: $1040.25
|
|
More info
|
HKS 2 Piece I/C Fitment Kit - EVO 9
HKS 2 Piece I/C Fitment Kit (for Type R I/C 13001-BM001 with Stock or GTII 7460R Turbo Kit)
Polished Aluminum
Fits: Mitsubishi Lancer Evolution IX 2006-2007
Part # 13006-BM001
Our price: $219.95
|
|
More info
|
Injen Front Mount Intercooler - EVO 8/9
Manufactured out of high quality mandrel-bent 6061 T6 Aluminum, tig-welded brackets for proper fitment and has a core size of Core w/ 3" inlet end tanks (23 3/4"
x 11 3/4"
TECH TIP: This is the front mount intercooler core ONLY and bolts...
Our price: $861.84
|
|
More info
|
Injen Intercooler Hard Pipe System - EVO 8/9
The all new Injen Intercooler Hard Piping Kit will accommodate your stock
intercooler and give it the added dress up your engine needs. This three piece
system easily bolts on to your 2003-2005 EVO VIII and MR without any
modifications and includes heavy duty T-bolt type clamps.
KEY ...
Our price: $377.05
|
|
More info
|
JM Fab 2.5" Lower IC Pipe Kit - EVO 8/9
Get rid of all that stock rubber piping by replacing your lower intercooler pipe with this aluminum mandrel bent piece. Made from 2.5" 6061 aluminum, this pipe reduces the number of bends and connections creating less restriction and better flow. The kit comes with 4-ply silicone couplers and hea...
Our price: $240.95
|
|
More info
|
JM Fab 2.5" Upper IC Pipe Kit - EVO 8/9
Get rid of all that stock rubber piping by replacing your upper intercooler pipe with this aluminum mandrel bent piece. Made from 2.5" 6061 aluminum, this pipe reduces the number of bends and connections creating less restriction and better flow. The kit comes with a 2 peice upper pipe, 3 high te...
Our price: $262.95
|
|
More info
|
JM Fab 3" Upper IC Pipe Kit - EVO 8/9
Get rid of all that stock rubber piping by replacing your upper intercooler pipe with this aluminum mandrel bent peice. Made from 3" 6061 aluminum, this pipe reduces the number of bends and connections creating less restriction and better flow. The kit comes with a 2 piece upper pipe, 3 high temp...
Our price: $316.95
|
|
More info
|
JM Fab Front Mount Intercooler - EVO 8/9
One of the most important factors in a turbocharged car is keeping the air cool. With many cores out on the market these days how do you know which works best? Well for us it was an easy decision....introducing our EVO front mount intercooler using a genuine Garrett core. These guys have been mak...
Our price: $789.95
|
|
More info
|
M7 Competition Type R Intercooler Kit - EVO 8/9
M7 Intercooler outer fin area is 22% lighter than standard factory intercooler. Due to this, cooling efficiency was increased by 15 to 20 percent. By using thinner core tube, M7 intercooler weight was reduced by 22 percent. Flow cross section of inner tube is increased and pressure loss was decre...
Our price: $683.00
|
|
More info
|
Mishimoto Front Mount Intercooler - EVO 8/9
The Mishimoto aluminum intercooler designed for the Mitsubishi Evo 7, 8, 9 is the perfect bolt-on upgrade for your stock Evo intercooler.
Crafted using tig welded, high quality aluminum, the Mishimoto Mitsubishi Evo 7, 8, 9 intercooler is designed to provide added horsepower throu...
Our price: $408.00
|
|
More info
|
Samco EVO 9 Intercooler Hose Kit
Samco silicon hoses are extremely durable and hand made for best fitment,
flow, and strength. The 3 ply hose comes in a 7 piece kit for all your turbo
hose parts. The kit is available in blue, red, and black. Each hose has the
Samco logo on it.
Fits: Mitsubishi Lancer ...
Our price: $316.95
|
|
More info
|
Samco Intercooler Hose Kit : Lancer EVO 8
Samco silicon hoses are extremely durable and hand made for best fitment,
flow, and strength. The 3 ply hose comes in a 7 piece kit for all your turbo
hose parts. The kit is available in blue, red, black, and yellow. Each hose has
the Samco logo on it.
Fits: Mitsubishi Lancer...
Our price: $254.95
|
|
More info
|
Speed Source EVO Lower Intercooler Pipe Kit
The Speed Source lower intercooler pipe is designed and produced to minimize
the amount of flexible rubber in the intercooler system. By eliminating as much
of the rubber hose as possible, the boost produced by the turbo is carried most
efficiently. In contrast to other after...
Our price: $188.95
|
|
More info
|
Synapse Lower Intercooler Pipe Kit - EVO 8/9
Synapse Engineering's design approach to the Evo LICP is to eliminate
unnecessary flow restrictions at the turbocharger outlet. The Synapse LICP retains the OEM turbo discharge pipe and maintains
the OEM boost-only source fitting to connect to the wastegate for a
much more stable boos...
Our price: $264.95
|
|
More info
|
Turbo XS EVO Front Mount Intercooler - EVO 8/9
The turboXS Front Mount Intercooler is a bar and plate design for maximum
efficiency. The core can handle up to 700 wheel horsepower. The kit
uses the factory or factory style intercooler piping.
Includes polished end tanks and mounting brackets for easy fitment.
<...
Our price: $629.10
|
|
More info
|
Turbonetics Spearco Front Mount Intercooler - EVO 8/9
This direct bolt-on high performance intercooler upgrade features the same W.A.V.E. Technology as used in all the other high horsepower race cars.
This intercooler is also the largest intercooler you can fit without any modification or cutting to the vehicle. All factory mounting ...
Our price: $1122.95
|
|
More info
|
TurboXS EVO 8/9 Intercooler Hard Pipe Kit
The TurboXS Hard Pipe Kit offers improved airflow, quicker boost
response, and higher boost pressure at redline compared to the
restrictive and turbulent OEM corrugated rubber pipes. In addition to all the
performance benefits, each pipe is hand-polished to a mirror fin...
Our price: $431.10
|
|
More info
|
Weapon R EVO 9 Intercooler Pipe Kit
You will experience quicker Turbo
response and an average increase of 8-13whp gain on a properly tuned
vehicle.The WR Intercooler pipe kit is made of AL6061 Aluminum and then bent
from our CNC Mandrel Bender, 3-ply hi-pressure silicone hoses and hardware for
an easy installa...
Our price: $388.95
|
|
More info
|
Weapon R Intercooler Pipe Kit - EVO 8
The WR Intercooler pipe kit is made of AL6061 Aluminum and then bent from our
CNC Mandrel Bender, 3-ply hi-pressure silicone hoses and hardware for an easy
installation. After installation the manufacturer experienced quicker turbo
responses and an avg. increase of 8-13whp gain on a prop...
Our price: $315.00
|
|
More info
|
WORKS Charge Intercooler Kit - EVO 8/9
The Mitsubishi OEM intercoolers are light and efficient but have limited capacity and are expensive.
The new line of WORKS Air-to-Air Intercooler Kits are designed for anyone upgrading their power by more than 20%+ or need to replace their stock intercooler (less expensive than OEM...
Our price: $698.95
|
return to top
|
 |
|
|
|
|
|
Live Help is available M-F 9am-5pm EST
|