More info
|
BC Racing BR Series Coilover Kit - Evo X
* 53mm Dampers (Larger then the Competition)
* Fixed Cup/Locking Collar Design (Unlike cheap coilovers, this feature will not change your ride heights, camber, or wear out your tires!)
* Full Pillowball Mounts in the Front & Rear. (where applicable)
...
Sale price: $1397.95
|
More info
|
Beatrush Oil-Air Separator Catch Tank - EVO X
The Beatrush Oil-Air Separator Catch Tank for Evolution X removes the oil from the engine ventilation system so the oil does not get sent through the intake system; while reducing pressure inside the crankcase through discharged gases released through the oil cap. Overall, this provides bet...
Sale price: $384.75
|
More info
|
Beatrush Rear Bulk Head Plate - EVO X
Interior divider for those that don't have a rear seat. Perfect for roll cage setups or roll bar EVO Xs that want a cleaner look.
Part# BR.A73060-A
***This item is Special Order and takes 6-8 weeks to ship
Sale price: $449.95
|
More info
|
Beatrush Red Rear Tow Hook - EVO X
The Beatrush rear tow hook is a direct bol-on so no drilling or cutting on bumper is required. This piece is durable and robust. Perfect for track EVO Xs.
Comes with brackets and everything needed to install.
Part# S103060TF-RA
Sale price: $163.95
|
More info
|
BeatrushRear Strut Tower Bar - EVO X
In efforts to further improve the rigidity of the Evolution X, Beatrush developed a rear strut bar. The rear strut bar uses a hollow D-shaped aluminum shaft bent to conform with the body of the car and allows the wiper fluid/battery to remain in place.
Features of this EVO X Strut ...
Sale price: $298.00
|
More info
|
Blitz Carbon Fiber Suction Intake Kit - EVO X
A complete Intake kit. Including the Carbon Air Duct, and the filter element.
This system will allow you to utilize the factory Cold air setup that forces
cool air from the front of the car into the intake system.
Fits: 08+ EVO X
Part# 27007
Sale price: $1268.95
|
More info
|
Blitz SUS Power Drop-in Air Filter - EVO X
Improve horsepower and gas mileage instantly!
TECH TIP: Direct drop in to the stock air box. Super easy installation can be done in your driveway in less than 5 minutes.
Fits: Mitsubishi ...
Sale price: $59.95
|
More info
|
Blitz Up Grade Wastegate Actuator Kit - EVO X
Instantly stabilizes boost pressure at high-rpm range!
Achieves highly stable boost at maximum boost region.
TECH TIP: Features a turn-buckle type adjustment rod for easy boost pressure setup. Direct bolt on! Easy installation....
Regular price:
$347.00
Sale price: $319.95 save 8%
|
More info
|
Blitz Upper Intercooler Pipe Kit - EVO X
The stock rubber hose expands at boosting which decreases the efficiency of the boost pressure. To eliminate waste of boost pressure as well as to increase performance by replacing factory rubber hoses to aluminum piping.
You will notice an instant difference in throttle response!<...
Sale price: $587.95
|
More info
|
Blitz Venturi Drive Blow-Off Valve Kit - EVO X
The Blitz Venturi Drive Blow off Valve for the 08-09 Evo X relieves compressor
surge without reducing compressor speed. It controls boost pressure that is
built up by the turbo and vents it into the atmosphere when the car is not under
load (in between shifts).
This prevents...
Sale price: $265.95
|
More info
|
BLOX Racing Engine Roller Stopper - EVO X
BLOX Racing EVO X billet front lower engine motor mount is designed to reduce the amount of engine torque associated with hard
driving and shifting.
Installs quickly and helps improve throttle response. These lightweight pieces are CNC-machined and feature hardened bushings
an...
Sale price: $84.95
|
More info
|
Boomba Manifold Gasket - EVO X
Part # 009-00-002
Fits: EVO X
Boomba Racing has developed a special high temperature insulating gasket which replaces stock intake gasket. Turbocharged cars use aluminum intercoolers to cool the air compressed by the turbocharger. Colder air has lesser volume, which ...
Sale price: $105.95
|
More info
|
Boomba Racing 75mm Throttle Body - EVO X / Ralliart
Part # 009-00-010
Fits: EVO X / Lancer Ralliart
Boomba Racing Evo X 75 mm throttle body is a direct replacement of the factory unit. Boomba 75 mm throttle body comes as a kit including stock manifold adaptor plate and 60 mm hose adaptor, which allows installation wit...
Sale price: $488.95
|
More info
|
Borla Cat Back Exhaust System - EVO X 2008, 2010-2015
Borla Performance has been manufacturing clever Cat-Back™ and Header systems for the Mitsubishi Evo since its inception. The newest flavor is by far the best yet, and Borla is proud to kick in with a dynamite new forceful, dual exit package that develops impressive double-digit horsepower while w...
Sale price: $979.95
|
More info
|
Brembo Drilled Rear Brake Rotors Set - EVO X
Are you tired of warping your stock rotors?
Time to upgrade to brembo slotted brake rotors.
Brembo drilled brake rotors are for drivers who want to improve the looks and performance of their vehicle's original braking system without...
Sale price: $460.95
|
More info
|
Brembo GT 345mm Rear 4 Piston Big Brake Kit - 2008-2014 EVO X
The next performance level, Gran Turismo, is comprised 2-piece vented rotors
that are 13.5 inch cross-drilled and/or slotted. In the 2-piece system, billet
aluminum hats are application specific and have been individually machined to
engineering specifications.
The marriage o...
Sale price: $3546.95
|
More info
|
Brian Crower 2.5L Stroker Kit - EVO X #BC0136
To form the
ultimate Stroker Kit use with BC Crankshafts with the corresponding
connecting rod and piston combination. The Brian Crower stroker kit
delivers a system matched setup that installs correctly the first time.
Although specific differ from kit to kit, you can be su...
Sale price: $3586.95
|
More info
|
Brian Crower 2.5L Stroker Kit - EVO X #BC0137
To form the
ultimate Stroker Kit use with BC Crankshafts with the corresponding
connecting rod and piston combination. The Brian Crower stroker kit
delivers a system matched setup that installs correctly the first time.
Although specific differ from kit to kit, you can be su...
Sale price: $3694.95
|
More info
|
Brian Crower 34mm Intake Valves - EVO X/Lancer Ralliart 2009+
Brian Crower Valves are made from premium stainless steel, fully
machined and swirl polished for ultimate air flow. Dished head for added
weight savings and increased valve control at high rpm. Standard and
oversize head.
Fits: EVO X/Lancer Ralliart 2009+
Part#...
Sale price: $167.95
|
More info
|
Brian Crower 35mm Intake Valves - EVO X/Lancer Ralliart 2009+
Brian Crower Valves are made from premium stainless steel, fully
machined and swirl polished for ultimate air flow. Dished head for added
weight savings and increased valve control at high rpm. Standard and
oversize head.
Fits: EVO X/Lancer Ralliart 2009+
Part#...
Sale price: $167.95
|
More info
|
Brian Crower 4340 Billet Crankshaft - EVO X
Brian Crower billet cranks are CNC machined on state-of-the-art mills
from round bar, premium 4340 chromoly steel to ensure the strongest
possible shaft available. Each Brian Crower crankshaft is nitrided for
added longevity and feature large radius journals for added strength at
high hor...
Sale price: $2193.95
|
More info
|
Brian Crower 4B11T 90mm Bore 1.1.mm Thick Gasket - Evo X
Brian Crower Mitsubishi 4B11T Evo X 90mm Bore 1.1mm Thick Gasket (BC Made in Japan)
Brian Crower Head Gaskets are sourced from the leader in Performance Head Gaskets; Cometic. All head gaskets are specifically chosen for maximum performance in your motor.
Part ...
Sale price: $229.95
|
More info
|
Brian Crower Connecting Rods - EVO X/Lancer Ralliart 2009+
Made from premium, 4340 steel billet material, Brian Crower connecting
rods are available in two distinct styles depending on horsepower,
budget and engine application, but both include the exclusive Brian
Crower oiling groove in the pin bushing for added oiling.
The bROD Se...
Sale price: $743.95
|
More info
|
Brian Crower Pistons CP Custom w/ pins, rings and locks 4B11T- Evo X
*STROKER/CUSTOM PISTONS*
CP custom pistons are made to order with 2618 aluminum forgings that are application specific. Choose any desired bore size and compression ratio, as well as added features like 9310 alloy wrist pin upgrade (5100 series is standard), anti-detonation grooves, latera...
Sale price: $969.95
|
More info
|
Brian Crower Single Valve Spring - EVO X
* Valvesprings
Designed for high rpm, Brian Crower valve springs are wound from only
the highest grade, super clean, chrome silicone alloy and feature
proprietary processing procedures (chamfer, debur, etc...) for
consistent pressures over long term, high rpm usage. Quality valve
s...
Sale price: $92.95
|
More info
|
Brian Crower Titanium Retainers - EVO X
* Retainers
The ultimate in lightweight high performance, Brian Crower titanium
retainers typically weigh in approximately 40% less than the factory OEM
steel units. CNC machined for premium 6AL4V titanium bar stock to
exacting tolerances.
Fits: Lancer EVO X
Sale price: $197.95
|
More info
|
Bride FO-Type LH Seat Rail - EVO X
BRIDE Seat Rails provide a solution for mounting you BRIDE Seats. Bride seat rails are a direct bolt in unit, perfect fitment.
*Special order item. Once order is placed, it cannot be cancelled.*
FO Type – Side Mount
- Driver side rail
- For aftermarket ...
Sale price: $239.95
|
More info
|
Bride FO-Type RH Seat Rail - EVO X
BRIDE Seat Rails provide a solution for mounting you BRIDE Seats. Bride seat rails are a direct bolt in unit, perfect fitment.
*Special order item. Once order is placed, it cannot be cancelled.*
- Passenger side rail
- For aftermarket seats
Fit...
Sale price: $221.95
|
More info
|
Bride MO-Type LH Seat Rail - EVO X
BRIDE Seat Rails provide a solution for mounting you BRIDE Seats. Bride seat rails are a direct bolt in unit, perfect fitment.
*Special order item. Once order is placed, it cannot be cancelled.*
MO Type – Bottom Mount
- Driver side rail
- For aftermarke...
Sale price: $260.95
|
More info
|
Bride MO-Type RH Seat Rail - EVO X
BRIDE Seat Rails provide a solution for mounting you BRIDE Seats. Bride seat rails are a direct bolt in unit, perfect fitment.
*Special order item. Once order is placed, it cannot be cancelled.*
MO Type – Bottom Mount
- Passenger side rail
- For afterma...
Sale price: $221.95
|
More info
|
Bride RO-Type LH Seat Rail - EVO X
BRIDE Seat Rails provide a solution for mounting you BRIDE Seats. Bride seat rails are a direct bolt in unit, perfect fitment.
*Special order item. Once order is placed, it cannot be cancelled.*
RO Type – Bottom Mount
- Driver side rail
- For aftermarke...
Sale price: $216.95
|
More info
|
Bride RO-Type RH Seat Rail - EVO X
BRIDE Seat Rails provide a solution for mounting you BRIDE Seats. Bride seat rails are a direct bolt in unit, perfect fitment.
*Special order item. Once order is placed, it cannot be cancelled.*
RO Type – Bottom Mount
- Passenger side rail
- For afterma...
Sale price: $200.95
|
More info
|
Buschur Racing Double Pumper Fuel System - EVO X
This is the newest addition to our line up for the Evo X. This is the FIRST offering of its kind for the Evo X. This is a TRUE drop in setup and it is all done while retaining the stock fuel lines and sending unit. No modification is needed to run this. This setup is similar to the same one we de...
Sale price: $929.00
|
More info
|
Buschur Racing Downpipe - EVO X
Already have a buschur racing catback exhaust? Well...The Buschur Racing Evo X downpipe is the next piece in order to give your EVO X the best performance.
The Buschur Racing EVO X downpipe is designed to fit the 2008+ GSR and MR editions. It is 2.75" stainless steel w/ and is ...
Sale price: $250.00
|
More info
|
Buschur Racing Dual Valve Spring + Retainer Kit - EVO X / Ralliart
Buschur Racing is pleased to have teamed up with Supertech to offer customers, the same valve springs and titanium retainers that they have had produced for our Stage 3 cylinder heads.
Supertech Performance is best known for high performance valves, and valvetrain components. With ...
Sale price: $389.00
|
More info
|
Buschur Racing Stage 3 2.0L Shortblock w/o Cores - EVO X
It is finally here.... a Buschur built bottom end so they can continue to push the limits of the 4B11T.
After much testing of the piston/rod combination in many cars across the world we are now confident enough to offer the parts for high horsepower builds in a drop in shortblock p...
Sale price: $5200.00
|
More info
|
C West Front Bumper PFRP - EVO X
Material: PFRP
This bumper is in conjunction with the grille. The stock
air duct in the bumper reinforcement will still be functional with the C-West
bumper.
**Please Note
Canards are not included**
Fits: 08+ EVO X
Part# CW-CCZ01A-FBPF
Sale price: $1138.95
|
More info
|
C West Hood Bonnet Air Inlet CFRP - EVO X
Material: CFRP
More air into the engine efficiently. This air Intake is
designed to inhale more fresh air into the hot engine room around the turbine
efficiently with out affecting any driver’s view.
Fits: 08+ EVO X
Part# CW-CCZ01A-BAICF
Sale price: $317.95
|
More info
|
C West Rear Bumper PFRP - EVO X
Material: PFRP
This is the complete rear bumper.
**Please Note some
OEM Parts are required for this bumper.**
Fits: 08+ EVO X
Part# CW-CCZ01A-RBPF
***Special Order only - takes 2-3 months***
Sale price: $1023.95
|
More info
|
C-West Carbon Fiber Hood Air Outlet - EVO X
This air outlet opening is designed bigger than stock to push out more air from the engine and also by changing the angle of the fins, air flow on top of the hood will pull out the air more from the engine bay. Sold as a pair and made from CFRP.
Carbon Fiber Reinforced Plastic(CFRP...
Sale price: $394.95
|
More info
|
C-West Full Body Kit - EVO X
Complete Kit Includes Front Bumper, Rear Bumper and Side Skirts.
Fits: 08+ EVO X
Part# CCZ01A-CCKIT
***Special Order only - takes 2-3 months***
Sale price: $2193.95
|
More info
|
Carbign Craft Carbon Fiber Grill Bezel - EVO X
Add a touch of carbon fiber flair with the Carbign Craft Dry Carbon Grill Bezel. The carbon fiber weave brings an exotic racing look to your car. Each Carbign Craft product is designed for perfect fitment and utilizes fade resistant epoxy coating to reduce the effects of UV light.
...
Sale price: $363.95
|
More info
|
Carbing Under Panel - Evo X 2008+
The CARBING Under Panel increases the aerodynamic efficiency of the vehicle which increases front down force,and stabilizes the water and oil temps.
Part Number: CA 509 329 0
Fits: Evo X 2008+
Sale price: $819.95
|
More info
|
Carbotech AX6 Front Brake Pads - Evo X
Carbotech AX6 Front Brake Pads - Evo X
Part Number: CT1001AX-AX6
The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F...
Sale price: $217.95
|
More info
|
Carbotech AX6 Rear Brake Pads - Evo X
Carbotech AX6 Rear Brake Pads - Evo X
Part Number: CT1368X-AX6
The AX6™ is specifically engineered for Autocross applications. A high torque brake compound delivering reliable and consistent performance over a very wide operating temperature range of 50°F to 1000°F +...
Sale price: $182.95
|
return to top
|