Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Mitsubishi OEM Oil Drain Plug Crush Washers (5 pack) - EVO 8/9/X
2. Mitsubishi OEM GL5 LSD Gear Oil Diaqueen Quart - EVO 8/9/X/Ralliart
3. Mitsubishi OEM DiaQueen SST Transmission Fluid - EVO X (6 Speed)
4. Mitsubishi OEM Coolant / Antifreeze - EVO 8/9/X
5. Mitsubishi OEM Power Steering Fluid - EVO 8/9/X
6. Mitsubishi OEM Brake Fluid - EVO 8/9/X
7. Royal Purple Synthetic 5w30 Oil Quart
8. Royal Purple Synthetic Racing 5w30 Oil Quart
9. Mitsubishi OEM 60K Fluid Service Kit - EVO X/Lancer Ralliart 2009+
10. Red Line MT-85 Manual Transmission Fluid Quart

Testimonials

Hey to all you guys and girls on lancershop! If you have ever wondered about how this website is and how it will treat you as a customer .... Well they are pretty good compared to a buach of other sites out there! Selection of parts is fantastic just need to keep your parts updated on which ones are still continued and which ones are not I don't like looking at things I can't get haha . I have ordered parts from them before and I did not have a problem. They got to my house before the eta which was impressive to me because the parts were coming from different warehouses across the country and from previous experiences with other sites that can be a pain in the butt! Now..... Only one little thing that isn't even a really big deal especially since I had somsomeo assist me right away and didn't leave me clueless..! I ordered rotors and they haven't got here when they were supposed to. But it was around the holidays so I should be prepared for any kind of delay. But hey I had a wonderful girl I.m. me and everything was straightforward and no bull crap and we got everything figured out. :) lancershop is a site I will be using in the future for sure!

robert sipe

View All Testimonials

Write Your Own Testimonial

Forced Performance Oil Filter Housing Line Kit - EVO 9

Product Description

We no longer recommend using oil supply from the cylinder head for the FP GREEN™ for the Mitsubishi Evolution 9 or FP RED™ for the Mitsubishi Evolution 9 in applications that run elevated boost pressures.

Oil pressure measurements made on various engines indicate that in some cases the amount of available oil pressure at the cylinder head feed location is less than desirable. This head feed location prioritizes the turbo oil supply after all other oil supply duties within the engine. We want the turbocharger to be supplied with a minimum of 45psi of oil pressure under full engine load, and sourcing oil supply from the cylinder head simply does not ensure this under all circumstances or possible combinations of engine configuration, oil viscosity, temperatures, balance shafts, main and rod bearing clearances etc.

Relocating the oil supply to the oil filter housing allows the turbocharger to be fed by a more stable and consistent source. This source is much higher pressure than required by the turbocharger (can be over 150psi), so our line kit includes a inline filter that also features the appropriate size restrictor to limit the pressure at the turbo to a maximum of 70psi hot oil pressure.

While many may insist that 20 or 30psi of oil pressure is sufficient to supply a typical floating journal bearing turbo, it is our specific experience that this is not always true in the case of an automotive racing turbocharger used in a performance application where excessive EGT, high shaft speed and maximum thrust load are the norm, not the exception.

Currently, damage resulting from insufficient oil pressure can still be repaired under the standard product warranty in cases where the turbocharger was purchased and installed prior to the introduction of this new solution to oil starvation. Of course it would be preferable to update the oil feed to the turbo prior to having a problem, and existing customers will be helped in every way possible in their efforts to update their oil feed lines in existing applications.

The new oil line, pictured above, will supply you with a block off bolt for the stock head feed location and all the supplies needed to feed your larger journal bearing turbo directly from the Evo's oil filter housing.

Included in the kit are the following pieces:

- 1 - 35" Length 1/4" JIC 120* Bend Hose Assembly
- 1 - 24" Length 1/4" JIC Straight Hose Assembly
- 1 - FP -4 AN Inline Filter with special .070" Orifice
- 1 - Filter Element
- 1 - O-Ring for Inline Filter Housing
- 1 - 3/8" BSPT to 1/4" Male JIC Adaptor
- 1 - 12mm X 1.25 Banjo Bolt
- 2 - 12mm Crush Washers
- 1 - 10mm Plug for Stock Oil Feed Location
- 1 - 10mm Crush Washer
- 1 - 1/4" JIC Union Male
- 2 - Cable Clamps
- 5 - 8" Zip Tie

Details

Price: $269.95

Purchase Product



Bearing Style

Qty

If you see this message, your web browser doesn't support JavaScript or JavaScript is disabled. Please enable JavaScript in your browser settings so the online store can function correctly.