AGP Front Mount Intercooler: EVO X :: EVO X Intercooler :: Intercooler :: LancerShop.com</title>
Search
 Home   Help   Testimonials   New Arrivals   View Cart   Install Tips 
Categories
Air Intake
Accessories
Blow Off Valve
Boost Controllers
Brakes
Clutch - Trans
Electronics
Engine
Exhaust
Exterior
Fuel
Gauges
Intercooler
Interior
Maintenance
Suspension
Turbo
Wheels

Deals of the Day

Bestsellers
1. AMS Front Mount Intercooler: EVO X
2. AMS Upper Intercooler Pipe/Hot Pipe - EVO X
3. ETS Mitsubishi Evolution X Intercooler Upgrade 2008-2015
4. AMS Lower Intercooler Pipe Kit - EVO X
5. ETS Mitsubishi Evolution X Upgrade Intercooler Kit 2008-2015
6. ETS Upper Intercooler Pipe Kit - 2008-2015 EVO X
7. Ultimate Racing Full Upper Intercooler Pipe 2pc Kit - EVO X
8. Ultimate Racing Lower Intercooler Pipe Kit - EVO X
9. ETS Mitsubishi Evo X and Evolution X Lower Intercooler Pipe Kit 2008-2015
10. ETS Mitsubishi Evo X and Evolution X Upper and Lower Pipe Kit 2008-2015


Testimonials
I thought I ordered the wrong part because I only received one cam gear but I figured out that they shipped me the other gear seperately, but the thing that was so great is that my agent spent the quality time to explain everything to me totally. I have my cam gears now and they run great. Thanks lancershop and I give a big thumbs up to jason, he knows how to treat customers. Will keep doing business with lancershop. Thx again!
tommy

View All Testimonials

Write Your Own Testimonial


Recently Viewed
No recent products.
Gift Cards
Gift certificates


TRENDING: Rexpeed | AMS | Ultimate Racing | Engine Parts | Buschur Racing


LancerShop.com :: Intercooler :: EVO X Intercooler :: AGP Front Mount Intercooler: EVO X

AGP Front Mount Intercooler: EVO X

AGP Front Mount Intercooler: EVO X

AGP Front Mount Intercooler: EVO X 

Product Description

AGP Front Mount Intercooler: EVO X

Part # AGP-EVOX-FMIC

Fits: Lancer EVO X 2008+

Enhance the performane of your 2008-up Mitsubishi Evolution X with the first front mount intercooler available, and now with cast end tanks! The AGP Turbo FMIC features cast aluminum end tanks attached to a 20"x13"x3.5" bar and plate core. This core has the largest surface area of any other core on the market. This assembly fits perfectly in the factory location and does NOT require you to remove or trim any portion of the stock bumper support. It also clears the factory lower under-tray so you do not need to remove it. It cools at 90-99% efficiency under almost all conditions and has less than .75psi pressure drop at 450 hp of airflow. You couldn't heat soak this intercooler if you tried.

Stop asking who manufactures our core for us. We're tired of explaining it, and we're not going to tell you. All you need to be concerned with is that you're getting the best intercooler for your Evo X. Look up reviews, look up dyno numbers, look up track times. Our intercooler steps it up and delivers.

Throughout our dyno testing on the Evo X, we kept seeing timing retard (knock) around 5000rpm with the factory intercooler and 91 octane gas, where the power would drop. Since we upgraded to this intercooler, we've noticed consistent power across the board due to a cooler air charge. Back to back pulls on the dyno now result in identical power curves due to no heatsoak. This is a great upgrade for a stock Evo X, and will help you make more and more power down the road as we continue to release products.

Dyno results showed peak gains of 20 ft/lbs and 25 whp, and nowhere did it lose power throughout the entrire RPM range. These tests were done on a car with a stock turbo, minor bolt ons, and a very conservative ECUTEK tune.

This is the same intercooler we run on our shop car, which so far has made over 530whp and trapped 11.55 @ 123.

The FMIC includes:

20"x13"x3.5" bar and plate core with cast end tanks weighing in at 24.5 lbs.
Silicone hoses and clamps
All necessary installation hardware
**2010 models will require a new mounting bracket as Mitsubishi decided to change the lower intercooler mount. $25**

Available with a black heat dispersion coating that helps "pull" the heat from the intercooler core- aiding with thermal transfer and increasing intercooler efficiency.

Available with the AGP logo stencil that will allow you to paint our logo on the intercooler any color you like.  We recommend using brake caliper paint, it seems to hold up the longest.



Details

Price: $731.95

Purchase Product

 
Logo Stencil:
2010+ Model:
Heat Dispersion Coating:
Qty        

 


Related Options

 


Customers Also Bought
Customers who bought this item also bought...
Ultimate Racing Lower Intercooler Pipe Kit - EVO X
Ultimate Racing Lower Intercooler Pipe Kit - EVO X
Kelford Stage 2 Cam Set - EVO X / Ralliart
Kelford Stage 2 Cam Set - EVO X / Ralliart
Kelford Beehive Valve Springs Set - EVO X / Ralliart
Kelford Beehive Valve Springs Set - EVO X / Ralliart
CBD Carbon Fiber Hood - EVO X
CBD Carbon Fiber Hood - EVO X
 
 
Online Users
» 4870 Shoppers

Your cart
Welcome to LancerShop! In order to shop with us, you must create an account.

Your Cart is Empty!
» View cart
» Checkout
» Wish list
» Where's my stuff?



New Arrivals
Wiseco Standard Size Piston and Ring Kit: EVO X Wiseco Standard Size Piston and Ring Kit: EVO X

Your Account
Username

Password


Remember Me
Recover password

If Javascript is disabled in your browser click here


Help

» Sales Inquiries
» Contact us
» Privacy statement
» Recover password


 
  1-888-554-6447 -- info@LancerShop.com  -- URL: https://www.LancerShop.com
© 2002-2024 LancerShop.com. All Rights Reserved.
 
LancerShop Reviews