Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. AEM UEGO Wide Band O2 Gauge 52mm - 30-4100
2. HKS, Blitz, Apexi Turbo Timer Harness: EVO 8/9/X
3. HKS Type 0 Turbo Timer
4. GReddy EVO Turbo Timer Plug & Play Harness
5. AEM Digital Wideband UEGO Gauge 30-4110
6. Innovate Wideband Air/Fuel Gauge DB Red w/LC-1 & O2 sensor
7. Apexi S-AFC NEO (Digital Fuel Controller)
8. SSP Relay Package - EVO X
9. AEM Analog UEGO Wideband Air/Fuel O2 Gauge
10. Innovate O2 Bung & Plug Kit

Testimonials

well i bought some spacers as an emergency i needed them ASAP. so i paid almost 60 bucks to have it second day delivery.. well a week goes by nothing, week and a half nothing. i called and spoke to someone with a minor complain about it i forget who i spoke with but they refunded me 13 dollars of the 57 and said she would get back to me the next day with info.
i waited another couple of days. well another full 2 weeks go by almost" and i was pretty mad....
i spoke with Dennis actually he was the one that sold me the spacers online messaging in the beginning.. i spoke with him for about 10-15 min about over the phone...
well he assured me that he would get back to me that same day.. man he helped me out big time eased my tension that i had with the company.
i planned on never coming back here to do business with lancer shop but you could deff say that Dennis turned it inside out.
he is a good person that deff seemed to go out of his way to help me out. companies need people like that and not someone who refunds me money and says they will get a hold of me back the next day. i could care less about the money id rather spend more money on a company that has something priced a little more then a company that that sells it for less with a customer service that is poor.
well i just want to say thank u Dennis for all your help :]
Luis

luis

View All Testimonials

Write Your Own Testimonial

King Rod Bearings - EVO 8/9

Product Description

The HP series was developed mainly for drag race applications needing a material that is harder than the Babbitt top layer. These applications demanded a structure that could withstand high loads for short duration and still offer higher embedabilty and compatibility. In response, KING developed the HP Series featuring the Alecular™ metal structure.

The HP series is also suited for many performance applications with nodular cast iron crankshafts, such as street, strip and some levels of circle track racing.

All King Bearings are specifically engineered to withstand the highest loads and RPMs generated by today’s top competition engines. All King Performance Engine Bearings feature:

* *“Bull’s Eye Tolerance”*. King engine bearings have the closest wall tolerances in the industry, with all shells matched to 0.0001".
* *Increased Height.* Greater rod bearing height improves bearing-to-bore contact/heat transfer and reduces spin potential at high RPM.
* *Improved Oiling.* Mains feature enlarged, chamfered oil holes.
* *Medium Eccentricity.* This enables optimum load distribution and improved oiling.
* *Dowel Holes.* Most rod bearings are available with or without dowel holes.
* *Narrowed Design.* Mains and rods are narrowed for large-radius crankshafts.

We offer the industry’s widest selection of sizes, including special clearance options. With more choices than ever, you’ll find the right King High Performance Engine Bearings for your most demanding applications.

*HP series is particularly suitable for the following cases:*
* When a tri-metal bearing’s Babbitt overlay extrudes over the sides, migrates to one end, or is physically removed by the crankshaft
* When the intermediate layer of a tri-metal bearing is exposed, damaging the crank journal and requiring expensive grinding or replacement
* When Contaminants enter the oil stream, scratching and damaging the crankshaft journals
*King HP Bearings Features*

*Applications*
* High-load, short-duration racing such as drag racing, tractor pulls, monster trucks, etc.
* Medium-load, long-duration racing such as circle track engines using nodular cast iron crankshafts

*Construction*
Bi-metal aluminum silicon alloy featuring fine micro-bore finish

*Features*
* 0.015" thick top layer for superior macro particle embedability and conformability
* 40 Vickers hardness to resist overlay migration and extrusion
* 450°F heat threshold for superior protection against friction and overheating
* Mains are 3/4 grooved for improved oiling to the rod journals

Part# CR4120SI

Details

Price: $31.95

Purchase Product