Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Mitsubishi OEM Front Axle Inner Boot Repair Kit - EVO X
2. Mitsubishi OEM Front Axle Seals - EVO X
3. Mitsubishi OEM Rear Suspension Crossmember Bolt - EVO X
4. Mitsubishi OEM Rear Suspension Crossmember Bolt - EVO X
5. Mitsubishi OEM Steering Gear Bellows - EVO X 2010+
6. Mitsubishi OEM Steering Tie Rod - EVO X
7. Mitsubishi OEM Rear Suspension Lower Arm Nut - EVO X
8. Mitsubishi OEM Outer Tie Rod End Assembly - EVO X
9. Mitsubishi OEM Front Axle Crossmember Bolt - EVO X
10. Mitsubishi OEM Front Suspension Lower Arm Bolt - EVO X

Testimonials

I've been a customer of Lancershop since soon after I purchased my Evo 8 in late 2003. I've done some business with one or two other MastaMinds internet storefronts, as well. After my latest experience, I had to drop in a testimonial!

Due to what had to be MY error, I ordered the wrong part for a spring prep for the racing season. It was quite a while before I finally ripped open my boxes to get to work. When I saw I had the wrong part I was pretty disappointed and figured I was stuck with it because it had been so long.

When I e-mailed in to verify exactly which part I had so I could sell it to someone who could use it, Natalie in the support department stepped right up and offered me an RMA for full price credit!

I was floored and elated!

They have an awesome selection of excellent parts, good prices, and now I know, some of the best service around!

Thanks MastaMinds!

Lindsay Johnson

View All Testimonials

Write Your Own Testimonial

Girodisc 2-Piece Replacement Front Rotors - EVO 8/9

Product Description

The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency. The Girodisc front rotors are approx 18.2lbs vs. 22lbs for the stock units. This reduction in rotational and unsprung weight allows for quicker acceleration and suspension response.

The central hat section of the disc is made from 6061-T6 aircraft specification aluminum. The disc is made from cast iron to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

When used with performance pads and hi-temp fluid, you have what amounts to a truly amazing solution to overheating or warping rotors.

Fits: Lancer EVO 8/9

Part# A1-008

Details

Price: $946.95

Purchase Product