Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Zaklee Clear Cam Gear Cover - EVO 8
2. Buschur Racing Cam Sensor Heat shield - EVO 8/9
3. Kelford 272/272 Race Cams Set - EVO 8
4. Tomei Adjustable Pulley Cam Gear Mitsubishi 4G63 EVO 4-9
5. AEM 5 Bolt Cam Gear Black - Lancer EVO
6. Fidanza Cam Gear - EVO 8/9
7. Brian Crower Stage 2 Street/Strip Specification Evo 4G63 Cams
8. HKS Cam Gears Set - Lancer EVO VIII
9. Brian Crower Adjustable Cam Gears - EVO 8
10. TiTek Carbon Fiber Cam Gear Cover : EVO 8/9

Testimonials

I've been a customer of Lancershop since soon after I purchased my Evo 8 in late 2003. I've done some business with one or two other MastaMinds internet storefronts, as well. After my latest experience, I had to drop in a testimonial!

Due to what had to be MY error, I ordered the wrong part for a spring prep for the racing season. It was quite a while before I finally ripped open my boxes to get to work. When I saw I had the wrong part I was pretty disappointed and figured I was stuck with it because it had been so long.

When I e-mailed in to verify exactly which part I had so I could sell it to someone who could use it, Natalie in the support department stepped right up and offered me an RMA for full price credit!

I was floored and elated!

They have an awesome selection of excellent parts, good prices, and now I know, some of the best service around!

Thanks MastaMinds!

Lindsay Johnson

View All Testimonials

Write Your Own Testimonial

FP BLACK Ball Bearing Turbocharger - EVO 9

Product Description

All Forced Performance EVO 9 turbos will now come standard with our new cast stainless turbine housing. This turbine housing has been designed to maximize flow while not sacrificing spool characteristics. It has a 3" outlet and has a TiAL MV-S waste gate flange machined directly onto the housing.

With the re-release of the EVO 9 BB Turbos we debut the new Xona Series CHRA which are a billet SS construction featuring expanded water jacketing which fully surround the entire hot side register for improved heat blocking in the turbine section.

Better materials extend the service life through improved corrosion resistance and reduced heat conduction into the bearing section of the CHRA. The rotating assembly is isolated from vibration 3 dimensionally via specially designed oil damping chambers which also serve to provide variable preload to the angular contact ceramic ball bearings ensuring that bearing preload increases with oil pressure, rpm and thrust loads a feature never before seen in ball bearing turbochargers. Correct loading of angular contact ball bearings and bearing temperature are the determining factors when it comes to the lifespan of the ball bearing.

EVO IX FP BB Black Features:

    Compressor wheel - 82HTA
    Flow rating - 68LB per minute
    CW Measurements - 59.1MM Inducer / 82MM Exducer
    TW Measurements - 67.3MM Inducer / 58.8MM Exducer
    Compressor Housing - 84MM Flow Advancement Port Cover
    Turbine Housing - FP Stainless EVO 9 Turbine Housing
    CHRA - FP Dual Ceramic Ball Bearing
    Oil Line - Included

The FP Black has long been the benchmark in the stock appearing EVO IX market propelling the platform into the low 9's and into and beyond the 600WHP territory all while passing itself off as a stock turbo. It's a potent combination of a 67MM turbine wheel mated with our 86HTA compressor wheel for a flow rating of 68LB per minute and a ton of fun in your EVO.

Of course to harness this insane power we had to develop our own Ball Bearing CHRA and true to our nature we kept it looking as close to what came on your car from the factory as possible. This BB CHRA allows you to push the outer limits of performance by increasing the allowable thrust loads over a normal TD05/6 journal bearing turbocharger and greatly reducing the risk of oil starvation from hard acceleration and cornering forces.

TECH TIP: The FP EVO Stainless Turbine Housing was designed for race applications where the turbocharger would be operating above 20psi. Attempting to operate below 20PSI can result in boost creep in some applications. EVO VIII cars wil need the FP install kit

Fits: Lancer EVO 9

Part# NTEVOBLACKBB

Details

Price: $2499.95

Purchase Product