Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Mitsubishi OEM Tie Rod End Assembly - EVO 8/9
2. Mitsubishi OEM Front Axle Seal - EVO 8/9
3. Mitsubishi OEM Front Wheel Hub Assembly - EVO 8/9
4. Mitsubishi OEM Rear Wheel Hub Assembly - EVO 8/9
5. Mitsubishi OEM Front Strut Mount - EVO 8/9
6. Mitsubishi OEM Rear Axle Seal - EVO 8/9
7. Mitsubishi OEM Front Axle Inner Boot Kit - EVO 8/9
8. Mitsubishi OEM Front Brake Caliper Bolt - EVO 8/9
9. Mitsubishi OEM Front Axle Crossmember Bolt - EVO 8/9
10. Mitsubishi OEM Steering Tie Rod - EVO 8/9

Testimonials

These guys are just great, parts are great they arrive fast and never broken from shipping . I purchase all my Evo parts from lancershop best site I've found for it , from the variety of the brands to the range of parts you can make your Evo anyway you would like with these guys , if I was bigger into raceing these people at lancer shop would probly look nice being repped on a racecar .

Kody dinney

View All Testimonials

Write Your Own Testimonial

AGP Oil Accumulator Catch Can- EVO X

Product Description

AGP Oil Accumulator Catch Can- EVO X

Part # AGP-EVOX-OILACCUM

Fits: Lancer EVO X

The 4B11 in the Evolution X is a high horsepower turbocharged engine and runs a significant amount of piston-to-wall clearance. The cylinder pressure from the forced air creates more heat in turbocharged applications when compared to non-turbocharged engines, thus the "World Engine" was designed as a "loose" engine for added safety and longevity purposes. Unfortunately, a byproduct of an engine that allows a lot of blow-by is oil residue makes its way past the PCV system and ends up in the intake manifold, and many other places.

This oil residue eventually enters the combustion chamber and will lead to lower overall fuel octane which can significantly affect how your engine runs. We have been using an oil separation solution for over 7 years that actually separates the oil from the air flowing between the PCV and intake manifold. It sounds easy enough, as many people have tried to adapt simple catch cans and industrial water valves to remove the oil from the air. Those products do work OK but only separate a small amount with respect to how much oil is actually passing through the system. Enter the AGP Oil Accumulator.

Our three chamber oil separator gathers the airborne oil particles through the middle chamber. Oil is separated from the air through the filtering media and drains through a perforated aluminum plate on the bottom side of the middle chamber then accumulating in the bottom chamber. As this oil is filtered through the middle chamber, clean air is then filtered again and exits through the top chamber. This three chamber system design provides the best protection against unwanted oil making its way to the combustion process.

The bottom of the Oil Accumulator has a threaded -4 ORB bung and a plug to provide the user with an easy way to drain the collected oil.

This fits the Evolution X perfectly and comes with hose and hose clamps for an easy installation.

The Oil Accumulator is completely constructed of aluminum and comes with a standard brushed aluminum finish. To provide some extra 'bling' to your engine bay, we also offer this polished or powdercoated finishes. Please allow 1-3 weeks for shipment on orders when selecting special finish options (other than raw finish).

Details

Price: $178.95

Purchase Product