ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9 :: Lancer Ralliart 2009+ Suspension :: Suspension :: LancerShop.com</title>
Search
 Home   Help   Testimonials   New Arrivals   View Cart   Install Tips 
Categories
Air Intake
Accessories
Blow Off Valve
Boost Controllers
Brakes
Clutch - Trans
Electronics
Engine
Exhaust
Exterior
Fuel
Gauges
Intercooler
Interior
Maintenance
Suspension
Turbo
Wheels

Deals of the Day

Bestsellers
1. Whiteline Front Roll Center Adjustment Kit: EVO 8/9/X
2. Whiteline Rear Sway Bar End Links Set - EVO 8/9/X
3. Eibach Pro-Alignment Front Camber Kit - EVO 8/9/X
4. Whiteline Rear Sway Bar End Links - EVO X
5. Whiteline Rear Camber Adjustable Kit - Lancer GTS, ES, DE/Lancer Ralliart 2009+
6. Megan Racing Street Coilover Kit - Lancer GTS, ES, DE 2008+/Lancer Ralliart 2009+
7. H&R Lowering Springs Kit - Lancer Ralliart 2009+/Lancer GT
8. Eibach Pro Lowering Springs Kit - Lancer Ralliart 2009+
9. Tein S Tech Lowering Springs Kit - Lancer Ralliart 2009+
10. Whiteline Front Adjustable Strut Tower Brace - Lancer GTS, ES, DE/Lancer Ralliart 2009+


Testimonials
Hey to all you guys and girls on lancershop! If you have ever wondered about how this website is and how it will treat you as a customer .... Well they are pretty good compared to a buach of other sites out there! Selection of parts is fantastic just need to keep your parts updated on which ones are still continued and which ones are not I don't like looking at things I can't get haha . I have ordered parts from them before and I did not have a problem. They got to my house before the eta which was impressive to me because the parts were coming from different warehouses across the country and from previous experiences with other sites that can be a pain in the butt! Now..... Only one little thing that isn't even a really big deal especially since I had somsomeo assist me right away and didn't leave me clueless..! I ordered rotors and they haven't got here when they were supposed to. But it was around the holidays so I should be prepared for any kind of delay. But hey I had a wonderful girl I.m. me and everything was straightforward and no bull crap and we got everything figured out. :) lancershop is a site I will be using in the future for sure!
robert sipe

View All Testimonials

Write Your Own Testimonial


Recently Viewed
SSR Wheel Taper Conversion Washers SSR Wheel Taper Conversion Washers
ACT Extreme Pressure Plate - EVO 8/9 ACT Extreme Pressure Plate - EVO 8/9
Drive Shaft Shop 2-Piece Rear Driveshaft (non-AYC) - EVO 8/9 Drive Shaft Shop 2-Piece Rear Driveshaft (non-AYC) - EVO 8/9

Gift Cards
Gift certificates


TRENDING: Rexpeed | AMS | Ultimate Racing | Engine Parts | Buschur Racing


LancerShop.com :: Suspension :: Lancer Ralliart 2009+ Suspension :: ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9

ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9

ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9

ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9 

Product Description

ME2-XTG4 kit features an Xtreme pressure plate for the most demanding driver. ACT Xtreme pressure plates use exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's 4-pad spring-centered race disc features a spring-center construction to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. ACT spring retainers utilize wraparound spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability. With the 4-pad spring-centered race disc, engagement is harsher, but shifting is faster. ACT's 4-pad spring-centered race disc is well-suited for smaller disc sizes in smaller engines. Monoloc is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to assure proper alignment, regardless of driver influence or vehicle modifications. Monoloc's hardened chrome-moly steel construction will provide years of service.

Fits: Lancer EVO 8/9

Part# ME2-XTG4


Details

Price: $1013.00

Purchase Product

 
Qty        

 


Related Options

 

Buy Together
ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9
ACT Xtreme Pressure Plate / 4 Puck Sprung Disc Clutch Kit - EVO 8/9
$1013.00
+
Buy Together For Only $1501.95
Buy Together Now
 
 
Online Users
» 4961 Shoppers

Your cart
Welcome to LancerShop! In order to shop with us, you must create an account.

Your Cart is Empty!
» View cart
» Checkout
» Wish list
» Where's my stuff?

Your Account
Username

Password


Remember Me
Recover password

If Javascript is disabled in your browser click here


Help
» Sales Inquiries
» Contact us
» Recover password


 
© 2002-2025 LancerShop.com. All Rights Reserved.
 
Password JDM