Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Walbro 255 Fuel Pump w/Install Kit - EVO 8/9
2. Mitsubishi OEM Exhaust Manifold Gasket (to turbo) -Ralliart 2009+
3. Tomei Adjustable Pulley Cam Gear Mitsubishi 4G63 EVO 4-9
4. Mitsubishi OEM Timing Belt - EVO 9
5. Whiteline Front 27mm Heavy Duty Sway Bar - EVO X
6. Mitsubishi OEM Power Steering Idler Pulley - EVO 8
7. Mitsubishi OEM Banjo Bolt (Head Side) - Evo 8
8. Mitsubishi OEM Front Caliper Bleeder Screw (Set of 4) - EVO 8/9
9. Ultimate Racing 3" Downpipe + O2 Housing: EVO X
10. AMS Mitsubishi Lancer Evolution X Polyurethane Front Motor Mount *Bushing Insert Only*

Testimonials

I'm an experienced international buyer and I can tell whether a customer's service is good or not.
Well.. let me put it this way..
You can't get anything more than Breanna's services.
She was always there to help, in the chat room, messages, and emails.
Always willing to find solutions and help in every way possible.
Now you have a returning customer for sure... :-)

Nick

View All Testimonials

Write Your Own Testimonial

ATP High Flow Compressor 3" Inlet Elbow - EVO 8/9

Product Description

High flow compressor 3" inlet elbow for Evo 8/9 (Evo 4-9) turbo. Light but rigid aluminum, replaces stock restrictive rubber hose. Compatible with the stock turbo or any stock location turbo. TIG welded construction, wrinkle black powdercoated. Specify turbo compressor inlet diamter. 2.5" stock or 4" (100mm) ported shroud inlet.

The turbo inlet hose sits between the MAF on the airbox and the the compressor inlet port on the turbo itself.

The stock rubber inlet hose found on the Evo 8/9 engine, while bigger than the average factory inlet hose, has an accordion (turbulence) inner passage as well as a restrictively small inner diameter that will limit peak flow (Horsepower).

When you graduate from the stock turbo and move to a unit that runs a larger compressor wheel, the stock inlet hose will compromise the operation of the larger wheel. In most cases, the efficiency of the larger wheel is drastically reduced and in some cases, NONE of the performance gains of the larger unit is realized because there is backpressure at the intake.

Symptoms of a max'ed out inlet hose are: Slow to hit full boost, limited peak HP/boost, sharp boost drop off at high revs.

On a 57/76mm (GT3076R) compressor wheel, we saw quicker spool throughout as well as a 35HP difference and nearly 50 ft/lb of peak torque.

Fits: Lancer EVO 8/9

Part# ATP-VEVO-110

Details

Price: $130.95

Purchase Product