Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Brembo Drilled Rear Brake Rotors Set - EVO X
2. StopTech Slotted Front Rotors Set - 2008-2014 EVO X
3. StopTech Slotted Rear Rotors Set - 2008-2014 EVO X
4. StopTech Slotted & Drilled Sport Brake Rotors FRONT- EVO X
5. StopTech Slotted & Drilled Sport Brake Rotors REAR- EVO X
6. Girodisc Front Slotted 2pc Rotor Set - 2008-2014 EVO X
7. DBA Front Drilled & Slotted 4000 Series Rotors - 2008-2014 EVO X
8. DBA Rear Slotted 4000 Series Rotors - 2008-2014 EVO X
9. DBA Front Slotted 4000 Series Rotors - 2008-2014 EVO X
10. DBA Rear Drilled & Slotted 4000 Series Rotors - 2008-2014 EVO X

Testimonials

This site is great, i recently got my Evo X a few months ago and I've been asking for help with what parts would be good for a first time Evo owner. They got back to me right away and gave me some very good suggestions on what what I should buy. I have a long list made of all the parts i want i just can only get them like 1 at a time, I save up and buy something then just repeat. so I just wanted to write and say thanks for all the help and to tell people that this is the site they should use for Evo parts. Thank you

Adam Ridings

View All Testimonials

Write Your Own Testimonial

FIC 2150cc Injector Set (High-Z) - EVO X

Product Description

Mitsubishi Evo X BlueMAX Fuel Injector Clinic Injector Set: 4 x 2150cc Saturated / High Impedance Injectors. Largest high impedance injector ever! Drop-in fit for size and plug! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. These injectors do not require a resistor pack or P&H drivers. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS

Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. Dynamic flow matching is used only on injector sets where the additional time and cost are justified by the corresponding benefits gained during the tuning process.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.

The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.

Fuel Injector Clinic injectors use the factory electrical connector or include solder-in pigtails. You can purchase adaptor ‘plug-n-play’ harnesses to avoid cutting your stock harness as an optional extra.

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.

This massive injector is in a class of its own when low end throttle response and short pulse width control is required. Multi point dynamic flow matching is used during the production of these injector sets due their large flow rate which significantly improves the ECU’s ability to control these injectors in the sub 2ms pulse width area )typical of idle and part throttle conditions.)

The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please strictly follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)

Part# IS127-2150H

Details

Price: $879.95

Purchase Product

Qty

If you see this message, your web browser doesn't support JavaScript or JavaScript is disabled. Please enable JavaScript in your browser settings so the online store can function correctly.