Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Brembo Drilled Rear Brake Rotors Set - EVO X
2. StopTech Slotted Front Rotors Set - 2008-2014 EVO X
3. StopTech Slotted Rear Rotors Set - 2008-2014 EVO X
4. StopTech Slotted & Drilled Sport Brake Rotors FRONT- EVO X
5. StopTech Slotted & Drilled Sport Brake Rotors REAR- EVO X
6. Girodisc Front Slotted 2pc Rotor Set - 2008-2014 EVO X
7. DBA Front Drilled & Slotted 4000 Series Rotors - 2008-2014 EVO X
8. DBA Rear Slotted 4000 Series Rotors - 2008-2014 EVO X
9. DBA Front Slotted 4000 Series Rotors - 2008-2014 EVO X
10. DBA Rear Drilled & Slotted 4000 Series Rotors - 2008-2014 EVO X

Testimonials

well i bought some spacers as an emergency i needed them ASAP. so i paid almost 60 bucks to have it second day delivery.. well a week goes by nothing, week and a half nothing. i called and spoke to someone with a minor complain about it i forget who i spoke with but they refunded me 13 dollars of the 57 and said she would get back to me the next day with info.
i waited another couple of days. well another full 2 weeks go by almost" and i was pretty mad....
i spoke with Dennis actually he was the one that sold me the spacers online messaging in the beginning.. i spoke with him for about 10-15 min about over the phone...
well he assured me that he would get back to me that same day.. man he helped me out big time eased my tension that i had with the company.
i planned on never coming back here to do business with lancer shop but you could deff say that Dennis turned it inside out.
he is a good person that deff seemed to go out of his way to help me out. companies need people like that and not someone who refunds me money and says they will get a hold of me back the next day. i could care less about the money id rather spend more money on a company that has something priced a little more then a company that that sells it for less with a customer service that is poor.
well i just want to say thank u Dennis for all your help :]
Luis

luis

View All Testimonials

Write Your Own Testimonial

GSC CNC Cylinder Head - EVO 8

Product Description

GSC Power-Division’s CNC cylinder head for the Mitsubishi Evolution’s 4-9 is nothing less than perfection.

GSC starts with a brand new OEM Mitsubishi cylinder head that is checked for port wall thickness and for casting flaws. After a good casting is approved, the steal valve guides are removed and the cylinder head is locked in to our Okuma 5 axis mill and the port work begins. Using the latest in computer aided software GSC has designed new intake and exhaust ports for the 4g63 head along with a reshaped combustion chamber to maximize port velocity and flow. Once the Okuma is finished milling away the unneeded aluminum from the cylinder head the head is removed and cleaned to remove any loose aluminum from the milling process. GSC installs a set of Bronze valve guides into the head and it’s off to have a precision valve job to allow for the +1mm over intake and exhaust valves. For the valve job GSC relies on a CNC based Newen Contour-BB to perform precision accurate valve seats specially designed to allow for maximum velocity where it counts most, right at the valve!

After all machining is finished the cylinder head is hot tanked and pressure cleaned before it is ready for final assembly. When installing each of the black nitrated stainless steel intake and Inconel exhaust valves proper stem height is checked on each and every valve stem. Every valve stem is ground to its OEM height to maintain exact valvetrain geometry. A matched set of GSC’s PACALOY Ò Beehive valve spring and titanium retainers are installed using Viton valve seals and the exhaust and intakes are shimmed to provide seat pressures with in 3% of each other. Finally, a spec card is generated and the GSC CNC Cylinder head is ready for a life of extreme performance.

Features:

·    Most Advanced Port Design available period.
·    Exact tolerances and matching port dimensions across all cylinders ports
·    35mm Supertech Stainless Steel Black Nitrided Intake valves
·    31.5mm Supertech Inconel Exhaust valves for the highest heat capacity
·    PACALOY Ò Beehive valve springs for maximum performance up to 11,000 rpm
·    GSC Titanium retainer and Chromolly spring seats
·    New Bronze/Magnesium Valve Guides
·    Valve train and port velocity designed for up to 12mm of camshaft lift
·    Available for purchase using a new casting or with a core exchange
·    NEWEN BB Valve Job
·    Each Head is pressure checked and decked
·    Sold Fully Assembled and ready for us

***No Core Required
Fits: Lancer EVO 8

Part# 4508

Details

Price: $4605.01

Purchase Product

Qty Out of stock