Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. ACT Street Disc Clutch Kit - EVO 8/9
2. BG Synchro Shift Transmission Fluid (3 Bottles)
3. BG Synchro Shift II Transmission Fluid (3 Bottles)
4. Mitsubishi OEM Throw Out Bearing - EVO 8/9
5. Exedy OEM Style Throw Out Bearing - EVO 8/9
6. ACT Streetlite Flywheel: EVO 8/9
7. Exedy Hyper Twin Plate Heavy Duty Clutch - EVO 8/9
8. ACT Clutch Alignment Tool: EVO 8/9
9. Competition Clutch Forged Ultra Lightweight Steel Flywheel - EVO 8/9
10. STM Clutch Fork Stop - EVO 8/9

Testimonials

Hey to all you guys and girls on lancershop! If you have ever wondered about how this website is and how it will treat you as a customer .... Well they are pretty good compared to a buach of other sites out there! Selection of parts is fantastic just need to keep your parts updated on which ones are still continued and which ones are not I don't like looking at things I can't get haha . I have ordered parts from them before and I did not have a problem. They got to my house before the eta which was impressive to me because the parts were coming from different warehouses across the country and from previous experiences with other sites that can be a pain in the butt! Now..... Only one little thing that isn't even a really big deal especially since I had somsomeo assist me right away and didn't leave me clueless..! I ordered rotors and they haven't got here when they were supposed to. But it was around the holidays so I should be prepared for any kind of delay. But hey I had a wonderful girl I.m. me and everything was straightforward and no bull crap and we got everything figured out. :) lancershop is a site I will be using in the future for sure!

robert sipe

View All Testimonials

Write Your Own Testimonial

Tomei Expreme Titanium Cat Back Exhaust - EVO 8/9 w/JDM Bumper

Product Description

Improve horsepower, torque and throttle response with the installation of this light weight high flowing cat back exhaust system.

TAIL PIPE
115mm Tip diameter with wall thickness of 1mm design with straight cut finish racing model for that Spartan look. The Titanium look with the laser marking and beautiful heat gradation gives the EXPREME Ti a good visual appeal.

SILENCER BAND
Made from stainless steel the band this band is designed as a support band instead of having is welded to the actual muffler. This keeps both separated and greatly reduces stress from vibration that would usually be present if the support was welded directly to the muffler. The band is also fitted with a special high heatproof spacer rubber for increased stress reduction from vibrations.

CLAMPS
Rather than the conventional T-type bolt the clamp band was chosen as it provides double the clamping force even under harsh conditions. This band is best suited for extreme conditions from high heat stress and vibrations this will firmly keep the pipes air tightly sealed together.

SILENCER
All of the 152mm diameter with wall thickness of 1mm Titanium design achieves the optimum exhaust efficiency and straight design, finished off with a mirror finish plate with the embossed logo and heat gradation color for that lasting impression.

The all Titanium made inner mesh tube with an open slot ratio of 32.6%. With maximum weight reduction and exhaust flow being the key points you can expect the best flow rate with an addictive racing sound from this exhaust without any compromise.

Unlike the usual conventional short fiberglass threads, the use of the long fiberglass thread wool was chosen for its excellent sound absorbing and excellent durability to cope with high pressure and high temperatures

PRECISION WELDING
Titanium is well known to be the most difficult to weld with for best results as the pre-preparation is required to remove dust and grease from the material. Once the optimum conditions are achieved then with the right strictly controlled welding methods with the heat rate and speed will then make it possible to achieve the high grade finish.

JOINT SPRING
The hook anchor points allows the springs to firmly hold the pipes together which is sufficient as it is alone but the use of the clamp bands adds that extra guarantee for a secure fitment for a reliable joint.

MAIN PIPE
The main purpose for this product is for pure competition performance exhaust efficiency so the racing layout design was made with bare minimum bends as possible over the entire F80mm t=1mm Titanium piping and the 3 piece for ease of installation and weight reduction.

FLANGE
The flange was made from a 6.0mm plate for strength design purposes to minimize distortions and cracks from aging to guarantee strength. This keeps the light weight design yet maintains strength equal to the factory stock design and guarantees the sealing characteristics that is required.

KIT CONTENTS
Silencer, Main Pipe A, Main Pipe B, Gasket, Flange Bolts, Clamp Band, Spring, Silencer Band, Flange Bolt M8, Flange Nut M8, Band Rubber, Sound Reducer, Button Bolt M6 x 10, 6 Point Wrench, Bolt Smooth Paste, Stickers

TECH TIP: This exhaust is only made to fit JDM EVO's and US Spec EVO's running the the JDM rear bumper. This exhaust is systems piping and muffler is made out of titanium. Which results in a lot less weight and a great sound that cannot be matched with stainless steel.

Fits: Mitsubishi Lancer Evolution VIII, IX JDM Spec or JDM Rear Bumper

Part # 440003

Details

Price: $1237.95

Purchase Product