Wait! There's More: |
|
1 |
2 |
3 |
4 |
5 |
|
More info
|
Ralliart Carbon Fiber Emblem
This real carbon fiber Ralliart emblem is the perfect addition to any EVO.
Badge includes self sticking back and will mount to any body, fender, dash
board, etc.
Part # 91019
Sale price: $10.95
|
More info
|
Ralliart Floor Mats Set - EVO X / Ralliart / Lancer GTS
Did you know replacing your floor mats is the biggest cosmetic modification
you can do to the interior of your Lancer?
Over the years the stock floormats
will become dirty, stained, and discolored and give your interior an old used
look.
These new floor mats fea...
Sale price: $143.95
|
More info
|
Ralliart JDM Aluminum Badge Set (2)
Perfect addition to any Mitsubishi.
Includes self sticking back and will mount to any body, fender, dash board,
etc.
Price includes a set of two badges!
Part # 91150
Regular price:
$39.99
Sale price: $10.95 save 73%
|
More info
|
Rexpeed Carbon Fiber Duckbill Trunk Spoiler - EVO X / Ralliart
If you are looking to replace your factory wing this Duckbill trunk spoiler is the answer.
Sleek and aggressive low profile look that will not attract too much attention especially from the po-po.
Trunk spoiler is made from high quality twill weave carbon fiber...
Sale price: $232.95
|
More info
|
Rexpeed Carbon LHD Double Pillar Pod - Evo X/Lancer Ralliart
Made from twill weave carbon fiber with clear coat finish. Pod comes in 52mm size holes but will also fit 60mm gauges you just need to enlarge the hole with dremel. With this option customer can have different size gauge setups if they wish. Gauge pod goes over factory pil...
Sale price: $244.95
|
More info
|
Rexpeed Dual Gauge Pillar Pod - EVO X / Ralliart
You can't duct tape your wideband gauge to your pillar, that's why they make this stylish gauge pod.
Made from high quality ABS plastic to match factory pillars.
This double pillar pod covers the entire factory pillar from top to bottom.
It fits over the stock pil...
Sale price: $68.95
|
More info
|
Rexpeed Duckbill Trunk Spoiler - EVO X / Ralliart
If you are looking to replace your factory wing the Rexpeed Duckbill trunk spoiler is the only answer.
Sleek and aggresive low profile look that will not attract too much attention especially from the po-po.
Trunk spoiler is made from high quality fiberglass using...
Sale price: $174.95
|
More info
|
Rexpeed Painted Red Vortex Generator - EVO X MR/Lancer Ralliart 2009+
Rexpeed Painted Red Vortex Generator - EVO X MR/Lancer Ralliart 2009+
PART# R-EVOX-PVG (P26)
This Vortex Generator will fit Evo X MR Touring Model with the flat roof only. It will also fit 2008 + RA model which also has a flat roof.
Antenna base cutout siz...
Regular price:
$156.95
Sale price: $97.95 save 38%
|
More info
|
SSP Flywheel - EVO X/Lancer Ralliart
Our aluminum flywheels are made from the highest quality 6061 T6 aluminum. The material is fantastic for strength, heat dissipation and of course reduction in weight. The ring gears we use are also made from 1050 steel and are heat treated for durability. The flywheel ring gears are heated then p...
Sale price: $398.95
|
More info
|
SSP Intake Manifold - Evo X/Ralliart
Evo X Titan Series Intake Manifold Specs:
SSP Intake Volume - 205 cubic inches
Stock Intake Volume - 140 cubic inches
SSP Intake Runner length - 7.0 inches
Stock Intake Runner length - 6.0 inches (runners vary in length)
- Optional 75mm T...
Sale price: $2498.95
|
More info
|
SSP Sidewinder Stage 2 Clutch - Evo X / Ralliart
SSP Sidewinder Stage 2 Clutch - EvoX/Ralliart
EVO X SST Sidewinder Stage 2 Clutch 600ft/lbs.
This is the highest torque handling EVO X SST 10 plate clutch on the market (600 ft/lbs). This clutch offers incredibly firm shifting while not sacrificing drivability. ...
Sale price: $1665.95
|
More info
|
StopTech Front Street Performance Brake Pads - Lancer Ralliart 2009+
Combining the benefits of premium street brake pads with aggressive friction formulas suitable for light track days and autocross events, StopTech Street Performance Brake Pads meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving c...
Sale price: $86.95
|
More info
|
StopTech Power Alloy Rear Slotted Rotors - Lancer Ralliart 2009+
Venting the gas emitted by hot brake pads improves overall brake performance and helps minimize fade. Stop Tech Power Alloy Brake Rotors are specifically designed to run cooler. In fact, all applications have superior metallurgy and design specifications, including vane designs (with some applica...
Sale price: $368.95
|
More info
|
Synapse Upper Intercooler Pipe Kit - EVO X / Lancer Ralliart 2.0T
The Synapse UICP retains the OEM turbo discharge pipe and maintains
the OEM boost-only source fitting to connect to the wastegate for a
much more stable boost control source. Competing designs require
elimination of this crucial component requiring the use of vacuum for
wastegate an...
Sale price: $289.95
|
More info
|
Tein Basic Coilovers - 09+ Lancer Ralliart/ 08+ Lancer ES
TEIN Type BASIC damper is for the driver that is seeking high performance with a reasonable price. The Basic damper includes 4 springs and 4 shocks. Compared to the "sleeve type" coil over, the Type Basic has a more exclusive set up for a better balance of suspension travel and damping forc...
Sale price: $850.00
|
More info
|
Torque Solution Engine Mount Inserts - Lancer Ralliart 2009+
Torque Solution polyurethane engine mount inserts that replace the inner rubber material of the OEM Dodge Caliber engine mounts.Each mount includes 2 half's and a center steel sleeve. These give you improved traction and reduced wheel hop without to much vibration. Bushings come with a lifetime w...
Sale price: $54.99
|
More info
|
Torque Solution Engine Mount Inserts - Lancer Ralliart 2009+
Torque Solution includes 2 urethane bushings and a sleeve for the
PASSENGER side and 2 urethane bushings and a sleeve for the DRIVER side.
Upgrading your stock rubber bushings to urethane bushings will help
reduce engine movement and wheel hop. Affordable price, easy install,
and mos...
Sale price: $104.99
|
More info
|
Torque Solution Fat Head Shift Knob - Evo 8,9,X and Ralliart
Torque Solution billet shift knobs are machined from 6061 Billet material and hard anodized to resist scratching and wear. Each knob weighs 188g / 6.6oz to give you that more positive & smooth feel when shifting. Suitable for all forms of racing and guaranteed to last a lifetime.
Sale price: $39.99
|
More info
|
TurboXS 3" Front Pipe - Lancer Ralliart 2009+
The TurboXS front pipe / downpipe completely replaces the restrictive stock downpipe. By replacing the stock downpipe you will gain horsepower, torque and improved throttle response.
Full 3 inch stainless steel pipe.
TECH TIP: ...
Sale price: $179.95
|
More info
|
TurboXS 3" Race Pipe - Lancer Ralliart 2009+
The TurboXS race pipe completely replaces the stock cat pipe. By replacing the stock cat you will gain horsepower, torque and improved throttle response.
Full 3 inch stainless steel pipe.
TECH TIP: 10 Wheel Horsepower Gain over...
Sale price: $141.95
|
More info
|
TurboXS 3" Turbo Back Exhaust System Catless - Lancer Ralliart 2009+
The TurboXS turboback exhaust system completely replaces the restrictive stock exhaust system from the downpipe back to the muffler. By replacing the stock exhaust you will instantly gain MASSIVE horsepower, torque and improved throttle response.
Full 3 inch stainless steel pipe. M...
Sale price: $1052.95
|
More info
|
TurboXS High Flow Cat Pipe - Lancer Ralliart 2009+
The TurboXS high flow cat pipe completely replaces the stock cat pipe. By replacing the stock cat you will gain horsepower, torque and improved throttle response.
Features a high flow metal matrix converter.
TECH TIP: 50 State ...
Sale price: $289.95
|
More info
|
Ulitmate Racing 3" Long Downpipe - Lancer Ralliart 2009+
- 304 stainless steel piping
- 3/8" thick machined flanges
- High quality stainless steel braided flex section with interlock lining
- One-piece design replaces both OEM cast "O2" Housing, and Downpipe
- Eliminates restrictive "donut" gasket
- Fits with OEM mani...
Sale price: $480.95
|
More info
|
Ultimate Racing Blow Off Valve Kit - Lancer Ralliart 2009+
This adapter kit allows for the installation of an HKS or TiAL blow off valve. Purchase either the adapter kit only (you supply your own blow off valve), or a complete kit with adapter kit and blow off valve.
- Includes all parts needed for installation
- Machined flange f...
Sale price: $115.95
|
return to top
Wait! There's More: |
|
1 |
2 |
3 |
4 |
5 |
|
|