|
|
538 results found
Displaying: 1 - 80 results
|
|
 |
|
| Wait! There's More: |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
 |
|
More info
|
ACT Street Clutch Kit: EVO X
The ACT Street EVO X kit will hold up to 420LBS Torque.
This is a full clutch kit, Includes street clutch disc, heavy duty pressure
plate, alignment tool, and throw out bearing.
The pedal feel is similar to stock. It is a little bit stiffer then stock, but
nothing that is ...
Our price: $744.95
|
|
More info
|
AEM Cold Air Intake System - EVO X
To gain power from the 4B11 MIVEC, AEM designed a fully enclosed airbox to house a DRYFLOW performance filter & utilize the factory air duct to draw the coolest air possible.
Each system is tuned on the dyno to deliver maximum torque and horsepower, and monitor OBDII sensors, ...
Market price:
$393.11
Our price: $288.95 save 26%
|
|
More info
|
aFe Stage 2 Air Intake - EVO X
Unlike many competitors, aFe flow-bench tests and dyno tunes each intake system in-house with an emphasis on mid-range power, giving your 4B11T powered EVO X more usable power and torque response in daily and real-world driving situations.
With aFe, enthusiasts are no longer lo...
Our price: $235.00
|
|
More info
|
Agency Power GT35R Twin Scroll Turbo Kit - EVO X
Agency Power is proud to be the first in the world to release a complete Garrett bolt on turbo upgrade for the new Mitsubishi EVO X. This turbo upgrade features all the hard parts you need to take your EVO X to the next level.
Our price: $5039.95
|
|
More info
|
AGP Billet Engine Motor Mount : EVO X
Help eliminate your engine movement with one of these mounts and
cut down on wheel hop as well as firm up your shifting when banging gears.
Completely replace your factory front lower roll stop on your Evolution X
with the AGP turbo solid mount. The frame is constructed ...
Our price: $139.95
|
|
More info
|
AGP Billet Wastegate Actuator: EVO X
Ditch your stock Evo X wastegate actuator for a high pressure adjustable AGP billet aluminum unit.
This replaces the factory installed piece, and will allow you to hold higher boost pressures to redline.
Because the AGP Wasteg...
Our price: $174.95
|
|
More info
|
AGP Cold Air Intake System: EVO X
Introducing the best performing intake available for the Evolution X. Not only does it eliminate the restrictive factory airbox, but it's the only intake on the market that locates the filter in the fenderwell. This allows the intake temperature to be the coolest possible before the air is...
Our price: $280.00
|
|
More info
|
AGP Front Mount Intercooler: EVO X
The AGP Turbo FMIC features tig welded constructed end tanks attached to a
20x12x3.5" bar and plate core.
This assembly fits perfectly in the factory location and does NOT require you
to remove or trim any portion of the stock bumper support. It also clears the
factory lower u...
Our price: $699.00
|
|
More info
|
AGP Intercooler Hard Pipe Kit: EVO X
This kit completely replaces the factory rubber hoses that can expand under boost. We have also relocated the factory blow off valve placement to the hot side tube and gave the re-route a direct path back into the intake.
The hot side tube is 2.5" mandrel bent polished aluminum wi...
Our price: $349.95
|
|
More info
|
AMS 3 inch Catback Exhaust: EVO X
With a 100% stainless steel construction and 3" diameter from end to end and
only two small 15 Degree bends you can expect to see as much as 15+ Wheel
Horsepower gains over stock.
Make more power, Lose 24 lbs over stock and make your EVO sound like
an EVO!
...
Our price: $688.95
|
|
More info
|
AMS 3 inch Exhaust Test Pipe: EVO X
15 Wheel horsepower gains from JUST A TEST PIPE!
This pipe replaces the restrictive stock cat converter. The pipe that is in
between the catback exhaust and downpipe.
AMS Stainless...
Our price: $199.95
|
|
More info
|
AMS Brake Cooling Kit - EVO X
In factory form, the brakes on the EVO provide great stopping power but
after sustained heavy braking they can begin to fade. By forcing airflow
directly through the rotor vents this kit drastically reduces the
temperature of the rotors, brake pads and calipers.
The AMS Mitsu...
Our price: $499.95
|
|
More info
|
AMS Cold Air Intake Conversion Kit - EVO X
With this kit you can convert your standard AMS EVO X intake to our cold-air version.
The AMS EVO X Performance Cold Air Intake offers the best performance gains available. By relocating the air filter to behind the driver side front bumper, cool air from outside the engine compa...
Our price: $199.95
|
|
More info
|
AMS Front Motor Mount (Pre-Pressed) EVO X
Improve throttle response and Clean up shifting in your EVO X.
Decreases Motor and transmission movement which in turn improves shifting and
driveability.
It has a Durometer Rating of 90A which carries the same qualities as the
Prothane and Energy Suspension mounts ...
Our price: $133.95
|
|
More info
|
AMS Front Motor Mount Bushing Insert: EVO X
Improve throttle response and Clean up shifting in your EVO X.
Decreases Motor and transmission movement which in turn improves shifting and
driveability.
It has a Durometer Rating of 90A which carries the same qualities as the
Prothane and Energy Suspension mounts ...
Our price: $49.95
|
|
More info
|
AMS Front Mount Intercooler: EVO X
This intercooler on our Test EVO X here with just a stock turbo picked up
10 Wheel horsepower over the stock core just by bolting it on!!!
The AMS replacement intercooler core for your EVO X is a direct bolt on
utilizing your stock piping hangers and mounting points with purpos...
Our price: $729.95
|
|
More info
|
AMS Lower Intercooler Pipe Kit - EVO X
The AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5” mandrel bent aluminum tubing.
The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to he...
Our price: $299.95
|
|
More info
|
AMS Performance 3" Widemouth Downpipe: EVO X
The AMS EVO X "Widemouth" downpipe is the most power producing downpipe on the market for the EVO 10.
Using a CAD designed cast o2 housing AMS was able to obtain every angle for perfect fitment and flow.
TECH TIP: The AMS down...
Our price: $449.95
|
|
More info
|
AMS Performance A/C Delete Kit - EVO X / Lancer Ralliart
The AMS EVO X, Ralliart A/C Delete Kit allows for removal of the compressor, lines and condenser for a weight savings of 20 lbs.
The black anodized billet aluminum bracket with CNC’d AMS logo is lightweight and durable for a long life. This kit is easy to install and u...
Our price: $99.95
|
|
More info
|
AMS Performance Cam Cap - EVO X / Ralliart
AMS designed this upgraded Cam Cap after a number of reports from customers of the OEM piece cracking. This can be a potentially expensive predicament due to the fact the OEM cam cap is not sold separately from the stock 4B11 cylinder head.
In the past, customers have found ...
Our price: $224.95
|
|
More info
|
AMS Performance Clutch Line Kit: EVO X
The AMS Evo X clutch line eliminates expansion giving you total control of your clutch.
As the clutch pedal is depressed, the stock nylon hose expands making your clutch pedal feel less direct and at worst can make it difficult to shift.
The AMS Evo X clutch line w...
Our price: $79.95
|
|
More info
|
AMS Performance Cold Air Intake - EVO X
The AMS EVO X Performance Cold Air Intake offers the best performance gains available. By relocating the air filter to behind the driver side front bumper, cool air from outside the engine compartment is drawn into the turbo.
The exclusive design improves air flow, inc...
Our price: $499.95
|
|
More info
|
AMS Performance Fuel Rail Kit: EVO X
The AMS EVO X Fuel Rail provides increased fuel flow which is REQUIRED at higher boost levels.
This CNC’d aluminum rail comes anodized in Red or Black and includes the signature AMS logo. With a -6AN (7.5 mm) diameter inlet and outlet it dwa...
Our price: $239.95
|
|
More info
|
AMS Performance Harness Bar - EVO X / Ralliart
Developed to not only perform as designed, but to keep the functionality of your stock or aftermarket seats as well.
You will not only be able to maintain 100% use of the factory seat belts, but you can also maintain almost FULL front seats adjustability.
Our price: $479.95
|
|
More info
|
AMS Performance High Flow Cat - EVO X / Lancer Ralliart
The AMS 3" High-Flow Cat provides an excellent way to increase horsepower all while keeping you legal. Utilizing a steel core catalytic converter instead of the conventional ceramic core this piece is designed to stand up to extreme conditions and last!
Like all other AMS exh...
Our price: $359.95
|
|
More info
|
AMS Performance Resonated Test Pipe - EVO X / Lancer Ralliart
The AMS 3" Stainless Steel Resonated Test Pipe provides an excellent alternative to running a catalytic converter on the street or at the track.
Like all other AMS exhaust products this resonated test pipe is Tig welded with 100% 304 stainless components including the flanges. Des...
Our price: $349.95
|
|
More info
|
AMS Performance Shifter Base Bushing Set: EVO X
Bang through gears with authority!
AMS Shifter Base Bushings will greatly improve shift quality and accuracy and are easy to install. Replaces the stock sloppy rubber base bushings.
Fits: Mitsubishi Lancer Evolution X 2008+ (U...
Our price: $38.95
|
|
More info
|
AMS Performance Short Ram Intake - EVO X
Adding an intake is the first step in modifying your EVO X.
The AMS EVO X intake pipe is designed to improve air flow to the
turbocharger and increase horsepower and performance.
We installed the AMS EVO X Performance Intake with an AMS Manual Boost
Control...
Our price: $349.95
|
|
More info
|
AMS Performance Solid Rear Diff. Mount Kit: EVO X
The AMS Mitsubishi Lancer Evolution X rear differential mount kit eliminates any rear differential movement under hard driving conditions.
Made from 100% billet 6061 aluminum and CNC machined for accurate tolerances.
The piec...
Our price: $119.95
|
|
More info
|
AMS Rear Trailing Arm Bushings Set: EVO X
The AMS Mitsubishi Lancer Evolution X Rear Trailing Arm Spherical
Bushings are designed to tighten up the rear of your Evolution X eliminating wheel hop at the drag strip and unwanted toe changes on the road course which can occur during braking and accele...
Our price: $369.95
|
|
More info
|
AMS Small Battery Install Kit : EVO X
This very easy to install piece will allow you to remove
you heavy stock battery and mount a
lightweight race battery on its side to not only
lower the overall weight of the car
Our price: $49.95
|
|
More info
|
AMS Small Battery Kit w/Battery : EVO X
This very easy to install piece will allow you to remove you heavy stock
battery and mount a lightweight race battery on its side to not only lower the
overall weight of the car but also lower the center of gravity.
Facts:
- The stock battery with tie down weighs a fat ...
Our price: $158.95
|
|
More info
|
AMS Stainless Brake Lines Kit: EVO X
AMS stainless steel brake lines improve pedal feel, reduce the amount of time between applied pedal pressure and actual deceleration by reducing the expansion that is allowed by stock rubber lines. This provides a quicker pedal response and consistent brake pressur...
Our price: $168.95
|
|
More info
|
AMS Transmission Cooler Kit: EVO X MR / Ralliart
Overheating is a common occurrence when driven hard.
The AMS Trans. cooler helps to prevent that by using a high quality
larger capacity heat exchanger with a fan that pulls air through the
core the entire time the car is running.
This helps to keep transmission ...
Our price: $499.95
|
|
More info
|
AMS Under Hood Stiff Shifter Bushings: EVO X
This will make a dramatic difference in the way your EVO X shifts.
- CNC precision machined for perfect fitment
- High quality Aluminum
- Includes everything needed for a painless install
- Greatly improves shift quality and accuracy
Fits: Mitsubish...
Our price: $39.95
|
|
More info
|
AMS Upper Intercooler Pipe Kit: EVO X
The AMS EVO X Upper Intercooler Pipe is designed to flow more air than
its stock counterpart and increase horsepower, and that it does!
With this simple upgrade AMS produced an additional 5 awhp peak and 10+ awhp
gains in the midrange!
At the pipe’s ...
Our price: $299.95
|
|
More info
|
Apexi GT 70mm Downpipe: EVO X
- Full Stainless Steel Construction
- 70mm diameter improves exhaust gas flow
- Includes all hardware and heat wrap for an easy install
- Direct bolt on!
Fits: Mitsubishi Lancer Evolution X 2008+ (CZ4A engine)
Our price: $327.95
|
|
More info
|
Apexi Power Intake System - EVO X
Easily improve throttle by installing this high flow efficient intake system.
Dry filter element air filter (non-oil) allows for increase airflow without fouling air flow sensors.
TECH TIP: Easy installation, takes less than 40...
Our price: $147.95
|
|
More info
|
Apexi RS Twin Tip Cat-back Exhaust: EVO X
- Full Stainless Steel Muffler system - Dual 120mm tips
- Full Cat back exhaust system using stainless steel piping with 70mm to 75mm piping
- Direct bolt on!
TECH TIP: Includes all hardware, and gaskets for easy installation.
Market price:
$1299.00
Our price: $1097.95 save 15%
|
|
More info
|
APR Carbon Fiber Front Splitter: EVO X
Designed to combat the effects of front end lift, APR Carbon Fiber Wind
Splitters help increase overall down force on your car. Wind Splitter Support
Rods are also included to secure the splitter to a vehicle front bumper. Made of
real carbon fiber.
Our price: $299.95
|
|
More info
|
APR Carbon Fiber Vortex Generator - EVO X GSR w/SSR Package
APR Vortex Generators help to guide the air flow on cars with very steep drop-off angles between the roof and the rear window. Air flow has a tendency to become turbulent as it separates from the surface of the car in this region. This turbulent air causes drag and reduces the effectiveness of a ...
Our price: $309.95
|
|
More info
|
APR Carbon Fiber Vortex Generator - EVO X MR and base GSR
APR Vortex Generators help to guide the air flow on cars with very steep drop-off angles between the roof and the rear window. Air flow has a tendency to become turbulent as it separates from the surface of the car in this region. This turbulent air causes drag and reduces the effectiveness of a ...
Our price: $309.95
|
|
More info
|
APR Front Bumper Canards: EVO X
Constructed of carbon graphite composite with aluminum leading edge, the APR Carbon Fiber Canard help increase front downforce at high speeds stabilizing the chassis during hard cornering. Found on many GT race cars, canards allow you to customize your car front end downfo...
Our price: $185.00
|
|
More info
|
ARC Carbon Fiber Hood Inlet Cover: EVO X
Promote cold air flow under the hood and spark up the appearance of your EVO 10 instantly!
TECH TIP: Direct bolt on for the factory hood Fits: Mitsubishi Lancer Evolution X 2008-2009 Special order part! No E...
Our price: $307.95
|
|
More info
|
ARC Front Mount Intercooler: EVO X
ARC's large design maximizes the opening on the stock bumper as well as aftermarket front bumpers. This is a full bolt on for the evolution X. Imported from ARC japan. TECH TIP: Core is 73mm thick. Does not include any piping, front mount core only. <...
Our price: $1494.95
|
|
More info
|
ARC Intake Induction Box: EVO X
This ARC cold air box works by incorporating a vortex at the inlet to the box, promoting fast and smooth airflow to the evo 10 turbo.
The results of this intake are improved spool as well as overall engine response. Direct bolt on! Fits: Mitsubishi Lancer...
Our price: $619.95
|
|
More info
|
ARP Head Studs Full Set: EVO X
Building an Evo X to make more power? Already making more power and your
coolant overflow tank is filling up for no good reason?
The factory head bolts
can begin to stretch with higher cylinder pressures and cause a enough space
between the block and head for combustion to leak o...
Our price: $158.95
|
|
More info
|
ARP Main Studs - EVO X
The APR main studs are an upgrade over the stock factory bolts that may stretch over time.
Includes a set of ten, M10 ARP2000 main studs, a set of ten, M8 ARP2000 main studs, twenty 8740 chromemoly steel 12 pt nuts and a 1/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant....
Our price: $178.95
|
|
More info
|
ARP Rod Bolts - EVO X
ARP has released Rod Bolts for the Mitsubishi 4B11 engine in the Evolution X ARP Rod Bolts are made of premium grade 8740 chrome moly steel and heat treated to a nominal tensile strength of 200,000 psi.
Our price: $104.95
|
|
More info
|
Artisan Street Assassin 50 Turbo: EVO X
The Artisan performance Street
Assassin 50 is the world’s first bolt on turbo
upgrade for the new Evolution X.
The SA50 has been dyno proven to put down over 450whp on pump gas and
propel a full weight EVO X to high 11 sec ...
Our price: $1149.95
|
|
More info
|
ATi Triple Center Dash Gauge Pod 60mm - EVO X
With this Gauge Pod it allows you to concentrate on the road and still
maintain visual contact with your gauges.
This gauge pod houses three 60mm gauges.
TECH TIP: Uses included double sided adhesive for an easy installation...
Our price: $149.95
|
|
More info
|
ATP 3" Cat Delete Pipe (Bent Version) EVO X
3" Race pipe, cat delete pipe for
EVO X (EVO 10). 304 grade Stainless tubing, TIG welded construction. Dual O2
bungs and CNC machined flanges. 100% bolt-up replacement for restrictive stock
cat assembly. Good for 30 ft/lb o...
Our price: $209.95
|
|
More info
|
ATP 3" Cat Delete Pipe (Straight Version) EVO X
Racepipe v2.0, cat delete for EVO X (EVO 10). Features stainless tubing, TIG welded construction. Dual O2 bungs (one extra for wideband tuning) and CNC machined flanges. 100% bolt-up replacement for restrictive stock cat.
Our price: $177.95
|
|
More info
|
ATP 3" Stainless Midpipe - EVO X
3" stainless mid-pipe for 2008 and up Mitsubishi Evolution x (10), mandrel bent and V-Band flanged, connects directly to back of cat on EVO X and terminates with 3½ V-Band flange which allows you to add one muffler with either single or dual exits. Use to build your...
Our price: $277.95
|
|
More info
|
ATP 950cc Injector Set - EVO X
EVO X injector set. Quantity 4. 950cc direct fit into stock fuel rail (same injector height). Comes with electrical adapter (4) so it's 100% plug and play into stock injector harness.
Our price: $457.95
|
|
More info
|
ATP Divorced and Transformable 3" Downpipe - EVO X
The divorced and transformable 3" stainless O2 housing and downpipe assembly for 2008 and up Mitsubishi Evolution X (10) is a much higher flowing replacement for stock restrictive cast iron exhaust elbow and small diameter downpipe just before the cat.
This unit bolts right up to ...
Our price: $419.95
|
|
More info
|
ATP EV6 Injector Adapter Wire - EVO X
Injector adapter wire. EV6 to EVO X. Allows an oval plug/with side release style injector to be plugged into the stock EVO X wiring harness. QTY 1 for 1 injector. Injector is not included.
Our price: $19.95
|
 return to top
| Wait! There's More: |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
|
|
|
 |
|
|
|
|
|
Live Help is available M-F 9am-5pm EST
|
