Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. Mitsubishi OEM Tie Rod End Assembly - EVO 8/9
2. Mitsubishi OEM Front Axle Seal - EVO 8/9
3. Mitsubishi OEM Front Wheel Hub Assembly - EVO 8/9
4. Mitsubishi OEM Rear Wheel Hub Assembly - EVO 8/9
5. Mitsubishi OEM Front Strut Mount - EVO 8/9
6. Mitsubishi OEM Rear Axle Seal - EVO 8/9
7. Mitsubishi OEM Front Axle Inner Boot Kit - EVO 8/9
8. Mitsubishi OEM Front Brake Caliper Bolt - EVO 8/9
9. Mitsubishi OEM Front Axle Crossmember Bolt - EVO 8/9
10. Mitsubishi OEM Steering Tie Rod - EVO 8/9

Testimonials

I needed help with my first EVO on what to buy to upgrade my EVO safely. I contacted support and Jay helped me by pulling up the perfect site that had the answers to all of my questions! I would rate Jay's service a 5/5 for his fast response and him not having to ask many questions to find the information I needed. Thanks again!

Gabriel Lee

View All Testimonials

Write Your Own Testimonial

Forge Oil Catch Tank for Intake Manifold System - EVO X

Product Description

The Evo X has a traditional style of breather system, that being a pipe joining the airfilter to the rear of the cam cover and a pipe joining the cam cover to the inlet manifold via a PCV mounted in the cover itself. At idle and cruise, the PCV opens and blow by gases are drawn from the cam cover and into the inlet manifold to be burnt in the normal combustion process. Unfortunately these blow-by gases are saturated with oil mist which effectively lowers the octane of the fuel, and over time coats the inside of the inlet manifold with oily sludge which further reduces performance. The Forge oil catch can system (FMCT1EV10) for the inlet manifold side of the engine uses baffles to catch the oil mist as it goes from the cam cover to the inlet manifold, and collects the residue in a catch tank mounted low down behind the bumper. Draining is made easy by a drain bolt that can be accessed just under the front of the car, and the inlet manifold draws in ‘clean’ air to burn.

Fits: Lancer EVO X

Part#FMCT1EV10

Details

Price: $486.00

Purchase Product