Home
Help
Testimonials
New Arrivals
View Cart
Install Tips
Categories
Air Intake
Accessories
Blow Off Valve
Boost Controllers
Brakes
Clutch - Trans
Electronics
Engine
Exhaust
Exterior
Fuel
Gauges
Intercooler
Interior
Maintenance
Suspension
Turbo
Wheels
Deals of the Day
Bestsellers
1.
Hawk HPS Front Street Brake Pads - Lancer Ralliart 2009+
2.
Hawk HPS Street Rear Brake Pads - 08+ Lancer GTS/09+ Lancer Ralliart
3.
WORKS SS Brake Line Kit - 2008+ Lancer
4.
EBC Red Stuff FRONT + REAR Brake Pads COMBO - Lancer Ralliart 08+
5.
StopTech Power Alloy Cryo-Treat Front Rotors - Lancer Ralliart 2009+
6.
Stoptech Front SS Brake Lines Kit - EVO X 2008-2010/Lancer Ralliart 2009+
7.
Stoptech Rear SS Brake Lines Kit - EVO X 2008-2010
8.
StopTech Power Alloy Cryo-Treat Rear Rotors - Lancer Ralliart 2009+
9.
Centric Plain 120 Series Front Rotors - Lancer Ralliart 2009+
10.
StopTech Power Slot 2009-2015 Lancer Ralliart Slotted Front Rotors
Testimonials
Lancershop.com is the only place I will shop for parts for my EVO. I have spent thousands of dollars from lancershop and have never spent one dollar that was not worth it. Excellent job everybody. Keep it up!!!!
Dan
View All Testimonials
Write Your Own Testimonial
Recently Viewed
LancerShop High Tech White T-Shirt : XL
ICHIBA Version 1 Hubcentric Wheel Spacers 20MM - EVO 8/9/X
Rexpeed Carbon Fiber Steering Wheel Cover - EVO X
Gift Cards
Gift certificates
TRENDING:
Rexpeed
|
AMS
|
Ultimate Racing
|
Engine Parts
|
Buschur Racing
LancerShop.com
::
Brakes
::
Lancer Ralliart 2009+ Brakes
:: FIC 2150cc BlueMax Injector Set (High-Z) - EVO 8/9
FIC 2150cc BlueMax Injector Set (High-Z) - EVO 8/9
FIC 2150cc BlueMax Injector Set (High-Z) - EVO 8/9
Product Description
Mitsubishi Evo BlueMAX Fuel Injector Clinic Injector Set: 4 x 2150cc Saturated / High Impedance Injectors. Largest high impedance injector ever! These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Great injector for E85 applications! These injectors do not require a resistor pack or P&H drivers. Includes pigtails PGT DEN4 or add Plug & Play adaptors PADPDtoJ4. DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS. Resistor pack removal recommended.
Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. Dynamic flow matching is used only on injector sets where the additional time and cost are justified by the corresponding benefits gained during the tuning process.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.
The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.
Fuel Injector Clinic injectors use the factory electrical connector or include solder-in pigtails. You can purchase adaptor plug-n-play harnesses to avoid cutting your stock harness as an optional extra.
This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicles OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.
This massive injector is in a class of its own when low end throttle response and short pulse width control is required. Multi point dynamic flow matching is used during the production of these injector sets due their large flow rate which significantly improves the ECUs ability to control these injectors in the sub 2ms pulse width area )typical of idle and part throttle conditions.)
The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please strictly follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. Since consistent fuel delivery is critical to high performance engine reliability we feel that using factory new injectors eliminates the increased potential for failure that exists when using remanufactured injectors. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted
Part# IS126-2150H
Details
Price: $879.95
Purchase Product
Plug & Play Option 4cyl:
Solder-In Pigtails
Plug & Play Adapter (+$45.00)
Resistor Pack Delete Plug:
No, Thanks
Yes, please add (+$22.00)
Qty
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
EBC Red Stuff FRONT + REAR Brake Pads COMBO - Lancer Ralliart 08+
EBC Front Brake Pads Green Stuff 2000 Series - Lancer Ralliart
Related Options
Also Bought
Customers who bought this product also purchased
Mitsubishi OEM Blade, Crankshaft Angle Sensing - EVO 8/9
Mitsubishi OEM Manual Transmission CTR Diff Pinion Shaft - EVO 8/9
Mitsubishi OEM P/S Oil Return Hose - EVO X
Red Line Water Wetter 12 oz.
Customers Also Bought
Customers who bought this item also bought...
Mitsubishi OEM EVO Brembo Brake Pads - EVO 8/9
Mitsubishi OEM Metal Head Gasket - EVO 8
Mitsubishi OEM Left Front Fender Inner Liner - EVO 8/9
Rexpeed Vortex Generator Apex Silver - EVO 8/9
Online Users
» 5430 Shoppers
Your cart
Welcome to LancerShop! In order to shop with us, you must
create an account
.
Your Cart is Empty!
»
View cart
»
Checkout
»
Wish list
»
Where's my stuff?
Your Account
Username
Password
Remember Me
Recover password
If Javascript is disabled in your browser click here
Help
»
Sales Inquiries
»
Contact us
»
Privacy statement
»
Recover password
Home
|
Tracking
|
Help
|
Install Tips
|
New Parts
|
Testimonials
|
Terms
1-888-554-6447 --
[email protected]
-- URL:
https://www.LancerShop.com
© 2002-2024 LancerShop.com. All Rights Reserved.