Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

Categories

Bestsellers

1. H&R Lowering Springs Kit - EVO X
2. Swift Spec-R Sport Lowering Springs - EVO X
3. Megan Racing Lowering Springs Kit - EVO X
4. Eibach Pro Lowering Springs Kit - EVO X
5. ISC N1 Coilovers - EVO X
6. Megan Racing Street Coilover Damper Kit: EVO X
7. ARK Performance GT-F Lowering Springs - EVO X
8. Tein S Tech Lowering Springs Kit - EVO X
9. BC Racing BR Series Coilover Kit - Evo X
10. Fortune Auto 500 Series Coilovers - Evo X

Testimonials

Hey to all you guys and girls on lancershop! If you have ever wondered about how this website is and how it will treat you as a customer .... Well they are pretty good compared to a buach of other sites out there! Selection of parts is fantastic just need to keep your parts updated on which ones are still continued and which ones are not I don't like looking at things I can't get haha . I have ordered parts from them before and I did not have a problem. They got to my house before the eta which was impressive to me because the parts were coming from different warehouses across the country and from previous experiences with other sites that can be a pain in the butt! Now..... Only one little thing that isn't even a really big deal especially since I had somsomeo assist me right away and didn't leave me clueless..! I ordered rotors and they haven't got here when they were supposed to. But it was around the holidays so I should be prepared for any kind of delay. But hey I had a wonderful girl I.m. me and everything was straightforward and no bull crap and we got everything figured out. :) lancershop is a site I will be using in the future for sure!

robert sipe

View All Testimonials

Write Your Own Testimonial

FIC 775cc Injector Set (High-Z) - EVO 8/9

Product Description

Mitsubishi Evo Fuel Injector Clinic Injector Set: 4x775cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Requires pigtails PGT USC4 or Plug &Play adaptors PADPUtoJ4. Resistor pack removal recommended.

Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. Dynamic flow matching is used only on injector sets where the additional time and cost are justified by the corresponding benefits gained during the tuning process.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.

The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.

Fuel Injector Clinic injectors use the factory electrical connector or include solder-in pigtails. You can purchase adaptor ‘plug-n-play’ harnesses to avoid cutting your stock harness as an optional extra.

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.

This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.

This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. Since consistent fuel delivery is critical to high performance engine reliability we feel that using factory new injectors eliminates the increased potential for failure that exists when using remanufactured injectors. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.

Part# IS126-0775H

Details

Price: $408.95

Purchase Product



Plug & Play Option 4cyl:
Resistor Pack Delete Plug:

Qty

If you see this message, your web browser doesn't support JavaScript or JavaScript is disabled. Please enable JavaScript in your browser settings so the online store can function correctly.