AMS 2.4L Big Bore Stroker Short Block - EVO X

Product Description

The AMS EVO X 2.4L Big Bore Stroker is the newest short block for the Evolution X designed by AMS Performance. By increasing displacement to a robust 2.4 liters, this powerplant allows you to run a larger turbo for increased horsepower without sacrificing your power-band.

Big Torque For Quicker Turbo Response

If you are running an upgraded turbo system, the Big Bore Stroker improves torque numbers down low by increasing stroke. 500 ft/lbs can be achieved as early as 4200rpm with the appropriate turbo system. Off the dyno, full spool can be achieved at just above 4000rpm. With the added torque, you will power out of turns quicker for improved lap times on the road course and leave your opponents in the dust on the street!

AMS Keeps You Ahead Of The Competition With A HUGE Power-Band

Big power is great but often comes with a narrow power-band and having to wait for your turbo to spool. What’s most impressive about this new engine configuration is it adds torque down low and that torque carries all of the way to redline. In addition, horsepower continues to climb all the way up to the maximum rev limit of 8500rpm. With such a wide power-band your EVO X will be unbeatable on the street or the track with big power and monster torque on tap at nearly any rpm.

Our Race Winning Experience Creates Higher Standards

All our race engines are individually handcrafted at AMS using the same care as the ones found in our world record holding street and race cars. When you choose an AMS engine you are investing in the knowledge gained from assembling thousands of race engines over the past 10+ years. With over 200 Victories in Motorsports over the last 3 years alone, it is clear that AMS is the only choice for your car!

Just like our 1500 HP Alpha GT-R's and 1400 HP AMS Drag EVO, every motor is balanced, blueprinted and assembled to AMS’ exacting standards. Before assembly each block is checked for correct dimensions, cylinder bore, mains, block flatness, etc… to ensure you get the best foundation for your new engine. Every engine we assemble has a build sheet where tolerances, torque specs, and clearances are documented.

The Perfect Combination for Power and Durability

Like all of our AMS engines, we only use the best off the shelf and custom-designed AMS spec. components. Combine that with the latest in machine and assembly practices and you are assured only the best!

Each block is precisely machined to accept AMS’ proprietary ductile iron sleeves. The sleeves are pressed into the block to sit atop a machined step to ensure they will not sink during engine operation. The new sleeves are machined to sit a few thousands above the rest of the deck surface allowing for a tighter sealing surface between the block and cylinder head.

The block is then final bored, honed and align honed with ARP main studs installed to ensure perfect clearances and fitment. The finished product allows for higher cylinder pressures as well as added strength and rigidity to the block.

Exclusive Benefits

    * Big torque increase combined with 8,500 peak RPM capability
    * Flat torque curve from 4200rpm all the way to redline
    * Increased displacement for more horsepower
    * Precise, documented hand assembly
    * Your choice of compression ratio

Includes

    * Sleeved AMS Block
    * Manley Billet Stroker Crank
    * Precision AMS Spec machine work on block & crank
    * JE Pistons w/ Skirt Coating
    * Manley I-Beam Rods
    * Manley Stroker Crankshaft
    * ARP Main Studs
    * AMS Machined Big-bore Head Gasket

Specifications

    * Displacement: 2.4 liters
    * Stroke: 94mm
    * Bore: 90mm
    * Compression Ratio:
          o 9.5:1 Street (best suited for pump gas)

Fits: Lancer EVO X

Details

Price: $8987.95

Purchase Product



AMS EVO X Gasket Kit:
New Oil Pump
Compression Ratio

Qty

Related Options

Also Bought

Online Users

» 5485 Shoppers

Your cart

Welcome to LancerShop! In order to shop with us, you must create an account.

Your Cart is Empty!

» View cart
» Checkout
» Wish list
» Where's my stuff?

New Arrivals

	Mitsubishi OEM Intercooler Hose MR993892 - Evo 9
	Mitsubishi OEM Intercooler Hose - Evo 9
	Mitsubishi OEM Rear Corner Air Dam phantom black - EVO X
	Mitsubishi OEM Side Air Dam phantom black - EVO X
	Mitsubishi OEM Front Air Dam phantom black - EVO X

Your Account

Help

» Sales Inquiries
» Contact us
» Privacy statement
» Recover password

1-888-554-6447 -- [email protected] -- URL: https://www.LancerShop.com