Home

Help

Testimonials

New Arrivals

View Cart

Install Tips

AMS 2.2L Big Bore Short Block - EVO X

Product Description

For those of you looking for a big-bore version of the 4B11 engine, look no further! AMS now offers the same 2.2L short block that powered the record-setting AMS Time Attack EVO X (TA-X) to the 2009 Redline Time Attack Championship! During the 2009 season, we were able to extract 850 horse power from this race-proven power plant – setting the world horsepower record for the EVO X in the process! After testing this amazing power house for an entire year of racing it is finally available to the public.

Big Benefits, No Compromises

Our 2.2 liter Big-Bore block adds displacement but in doing so maintains a great peak RPM capability by increasing bore and not stroke. The result is an increase in power without compromising RPM limitations. With proper tuning and supporting modifications the AMS 2.2L short block is capable to rev up to over 10,000 RPM! Additionally, you can expect a 10% increase in torque and a 400-500 rpm improvement in spool up time. Road racers will pull through corners better and drag racers will benefit from boost response after shifts.

The Perfect Combination for Power and Reliability

This race proven power plant uses only the best off the shelf and custom designed AMS spec. components. Combine that with the latest in machine and assembly practices and you are assured only the best!

By utilizing ductile iron sleeves combined with extra thick ring lands and skirt coatings on the pistons we achieve maximum reliability for your 4B11 build. Each block is precisely machined to accept AMS’ proprietary ductile iron sleeves. The sleeves are pressed into the block to sit atop a machined step to ensure they will not sink during engine operation. The new sleeves are machined to sit a few thousands above the rest of the deck surface allowing for a tighter sealing surface between the block and cylinder head. The block is then final bored, honed and align honed with ARP main studs installed to ensure perfect clearances and fitment. The finished product allows for higher cylinder pressures and added strength and rigidity to the block.

The block is then final bored, honed and align honed with ARP main studs installed to ensure perfect clearances and fitment. The finished product allows for higher cylinder pressures and added strength and rigidity to the block.

Our Race Winning Experience Creates Higher Standards

All our race engines are individually handcrafted at AMS using the same care as the ones found in our world record holding street and race cars. When you choose an AMS engine you are investing in the knowledge gained from assembling 1000's of race engines over the past 10+ years. With over 200 Victories in Motorsports over the last 3 years alone, it is clear that AMS is the only choice for your car!

Just like our 1500 HP Alpha GT-R's and 1400 HP AMS Drag EVO, every motor is balanced, blueprinted and assembled to AMS’ exacting standards. Before assembly each block is checked for correct dimensions, cylinder bore, mains, block flatness, etc… to ensure you get the best foundation for your new engine. Every engine we assemble has a build sheet where tolerances, torque specs, and clearances are documented.

Do it right the first time, order your AMS 2.2L Big-Bore Engine today!

Exclusive Benefits

    Great peak RPM capability by increasing bore and not stroke
    Race-proven for longevity
    Precise, documented hand assembly
    Your choice of compression ratio

Includes

    Sleeved AMS block
    Precision AMS spec machine work on block & crank
    JE Pistons w/ skirt coating
    Manley I-Beam rods
    High performance rod & main bearings
    ARP main studs
    AMS machined big-bore head gasket

Specifications

    Displacement: 2.2 liters
    Stroke: 86mm
    Bore: 90mm
    Compression Ratio:
            9.5:1 Street (best suited for pump gas)
            10.5:1 Race (best suited for race gas, careful tuning required for pump gas)

***NO CORE

Details

Price: $9579.95

Purchase Product



Compression Ratio:
New Oil Pump:
AMS Gasket Set:
AMS Headstud Kit:

Qty

Mitsubishi OEM Positive Battery Cable Fuse Block - EVO 8 Build Date 12/02 up to 7/04

Buschur Racing High Pressure Throttlebody Shaft Seals - EVO 8/9

Related Options

Also Bought

Customers Also Bought

Customers who bought this item also bought...

Ultimate Racing Fuel Injector Kits - Evo X / 09+ Lancer ralliart

Updated Mitsubishi Fuel Injector Relay - EVO X

Updated Mitsubishi Fuel Pump Relay - EVO X

AEM 340LPH In Tank Fuel Pump Kit

Online Users

» 5993 Shoppers

Your cart

Welcome to LancerShop! In order to shop with us, you must create an account.

Your Cart is Empty!

» View cart
» Checkout
» Wish list
» Where's my stuff?

New Arrivals

	Mitsubishi OEM Intercooler Hose MR993892 - Evo 9
	Mitsubishi OEM Intercooler Hose - Evo 9
	Mitsubishi OEM Rear Corner Air Dam phantom black - EVO X
	Mitsubishi OEM Side Air Dam phantom black - EVO X
	Mitsubishi OEM Front Air Dam phantom black - EVO X

Your Account

Help

» Sales Inquiries
» Contact us
» Privacy statement
» Recover password

1-888-554-6447 -- [email protected] -- URL: https://www.LancerShop.com